Ruckus 2821
ruckus-2821.jpg

SoC

Seems to be based on ar531x.

About

The board seems to be very close to the Fonera, which is also based on the ar531x. There is probably a way to compile a decent redboot bootloader for it.

Reboot sources

See .

Serial port

There is a serial port on the board:

# screen /dev/ttyUSB0 9600

It runs Vxworks:

ar531xPlus rev 0x00000086 firmware startup...
CTL Reg: 0x01060014
CTL Reg: 0x01160014
flash page write circuit present !!!
GD6-5 version 4.0.0.167
auto-booting...
Attaching to TFFS... done.
Loading /fl/apv54...1101040
Starting at 0x804846e0...
flash page write circuit present !!!

/fl/  - Volume is OK 
Reading Configuration File "/fl/apcfg".
apCfgOpModeSet(0, 0)
apcfg:0 set OpMode to Access Point
apCfgOpModeSet(1, 0)
apcfg:1 set OpMode to Access Point
Configuration file checksum: 5e36b is good
Setting MV Port 5 to 100 Full
Please check the ethernet cable on port 0!
apInit call ar5hwcCreatePhy(0)
v54_antinfo_init: 6C: using max 3 of 6 = 41 states
v54_hwantctrl_init: 2316
Pinot+ Adaptive Control Algorithm, Copyright (C) 2003-2005, Video54 Technologies, Inc. All Rights Reserved.
Pinot+ Adaptive Control Algorithm, Copyright (C) 2003-2005, Video54 Technologies, Inc. All Rights Reserved.
apInit call ar5hwcCreatePhy(1)
Attaching interface lo0...done
Adding 5209 symbols for standalone.
                VxWorks
Copyright 1984-2001  Wind River Systems, Inc.
            CPU: GD6-5
   Runtime Name: VxWorks
Runtime Version: 5.4.20x
81fffdf0     (BSP version: 1.0
t        Created: RooJul 17 2006, 17:48:5tTask8): 
 netLibIni            WDB: tneReadytTaskSemId = 0x.
8038ee10
Video54 Ac
cess Point Rev 3.3.0x1.1481
81fffdf0v54 (AP software tRootTask3.3.1.1481): Cntlsizeof(ATHEROS_DESC)=
160 1.2 Copyright  CACHE_LINE_SIZE=p4b32uild
(C) 2005 Vide0x@81fffdf0o54 Techn (BULLETtRootTaskolo): :wireless access point starting...
h:/atheros/ap/ap/os/vxworks/target/proj/ap-ar5315-productiongi
es Inc.Jul 17 2006, 17:48:58
wlan0 -> Auto Channel Scan selected 2472 MHz, channel 13
0x81fffdf0 (tRootTask):  wlan0 Ready
0x81fffdf0 (tRootTask):  Ready
ar531xPlus rev 0x00000086 firmware startup...
CTL Reg: 0x01060014
CTL Reg: 0x01160014
flash page write circuit present !!!
GD6-5 version 4.0.0.167
auto-booting...
Attaching to TFFS... done.
Loading /fl/apv54...1101040
Starting at 0x804846e0...
flash page write circuit present !!!

/fl/  - Volume is OK 
Reading Configuration File "/fl/apcfg".
apCfgOpModeSet(0, 0)
apcfg:0 set OpMode to Access Point
apCfgOpModeSet(1, 0)
apcfg:1 set OpMode to Access Point
Configuration file checksum: 5e36b is good
Setting MV Port 5 to 100 Full
Please check the ethernet cable on port 0!
apInit call ar5hwcCreatePhy(0)
v54_antinfo_init: 6C: using max 3 of 6 = 41 states
v54_hwantctrl_init: 2316
Pinot+ Adaptive Control Algorithm, Copyright (C) 2003-2005, Video54 Technologies, Inc. All Rights Reserved.
Pinot+ Adaptive Control Algorithm, Copyright (C) 2003-2005, Video54 Technologies, Inc. All Rights Reserved.
apInit call ar5hwcCreatePhy(1)
Attaching interface lo0...done
Adding 5209 symbols for standalone.
                VxWorks
Copyright 1984-2001  Wind River Systems, Inc.
            CPU: GD6-5
   Runtime Name: VxWorks
Runtime Version: 5.4.20x
81fffdf0     (BSP version: 1.0
t        Created: RooJul 17 2006, 17:48:5tTask8): 
 netLibIni            WDB: tneReadytTaskSemId = 0x.
8038ee10
Video54 Ac
cess Point Rev 3.3.0x1.1481
81fffdf0v54 (AP software tRootTask3.3.1.1481): Cntlsizeof(ATHEROS_DESC)=
160 1.2 Copyright  CACHE_LINE_SIZE=p4b32uild
(C) 2005 Vide0x@81fffdf0o54 Techn (BULLETtRootTaskolo): :wireless access point starting...
h:/atheros/ap/ap/os/vxworks/target/proj/ap-ar5315-productiongie
s Inc.Jul 17 2006, 17:48:58
wlan0 -> Auto Channel Scan selected 2472 MHz, channel 13
0x81fffdf0 (tRootTask):  wlan0 Ready
0x81fffdf0 (tRootTask):  Ready
wlan0 -> 
wlan0 -> 
wlan0 -> 
wlan0 -> 
wlan0 -> 
wlan0 -> ls
apcfg          4793
apv54        995860
apcfg.bak      4788
bootromM.sys 263440
6240256 bytes free
wlan0 -> ls
Invalid input characters!
wlan0 -> ps
Unknown command: ps
Type "help" for a list of valid commands.
wlan0 -> ifconfig
Unknown command: ifconfig
Type "help" for a list of valid commands.
wlan0 -> help
List of Access Point CLI commands:
 ?                                  -- Display CLI Command List
 arp add                            -- create or modify ARP table entry
 arp delete                         -- remove ARP table entry
 arp flush                          -- flush all entries in the ARP table
 arp show                           -- Display firmware information
 board change                       -- Change Board Data
 board dump                         -- Dump Board Data
 add remoteWbr                      -- Add a remote Wireless Bridge
 admin                              -- Temporary factory admin
 boot flash                         -- Boot from flash
 boot ethernet                      -- Boot from network
 boot dump                          -- dump boot line data
 cat                                -- list file
 cp                                 -- Copy file
 config wlan                        -- config wlanX
 connect bss                        -- connect to bssX
 del acl                            -- Delete Access Control List
 del key                            -- Delete Encryption key
 del remoteWbr                      -- Delete a remote Wireless Bridge
 del seed                           -- Delete Random Seed
 dis                                -- Dis-associate an End Station
 eeprom                             -- dump eeprom data
 find bss                           -- Find BSS
 find channel                       -- Find Available Channel
 find all                           -- Find All BSS
 format                             -- Format flash filesytem
 bootrom                            -- Update boot rom image
 ftp                                -- Software update via FTP
 get 11gonly                        -- Display 11g Only Allowed
 get 11goptimize                    -- Display 11g Optimization Level
 get 11goverlapbss                  -- Display Overlapping BSS Protection
 get abolt                          -- 
 get acl                            -- Display Access Control List
 get aging                          -- Display Aging Interval
 get antenna                        -- Display Antenna Diversity
 get arp                            -- Display arp Table
 get if                             -- Display attached network interfaces
 get routes                         -- Display routing table 
 get association                    -- Display Association Table
 get authentication                 -- Display Authentication Type
 get autoProvision                  -- Display Auto-Provision Mode
 get autochannelselect              -- Display Auto Channel Select
 get basic11b                       -- Display Basic 11b Rates
 get basic11g                       -- Display Basic 11g Rates
 get beaconinterval                 -- Display Beacon Interval
 get bridgeTable                    -- Display internal SW bridge table
 get burstSeqThreshold              -- Display Max Number of frames in a Burst
 get burstTime                      -- Display Burst Time
 get cacheperf                      -- Display the cache performance counters
 get calibration                    -- Display Noise And Offset Calibration Mode
 get cckTrigHigh                    -- Display Higher Trigger Threshold for CCK Phy Errors for ANI Control
 get cckTrigLow                     -- Display Lower Trigger Threshold for CCK Phy Errors for ANI Control
 get cckWeakSigThr                  -- Display ANI Parameter for CCK Weak Signal Detection Threshold
 get channel                        -- Display Radio Channel
 get cipher                         -- Display Encryption cipher
 get compproc                       -- Display Compression scheme
 get compwinsize                    -- Display Compression Window Size
 get config                         -- Display Current AP Configuration
 get countrycode                    -- Display Country Code
 get ctsmode                        -- Display CTS mode
 get ctsrate                        -- Display CTS rate
 get ctstype                        -- Display CTS type
 get domainsuffix                   -- Display Domain Name Server suffix
 get dtim                           -- Display Data Beacon Rate (DTIM)
 get dhcp                           -- Display DHCP Client Mode
 get enableANI                      -- Display Adaptive Noise Immunity Control On/Off
 get encryption                     -- Display Encryption Mode
 get eth                            -- Display Ethernet Statistics
 get extendedchanmode               -- Display Extended Channel Mode
 get firStepLvl                     -- Display ANI Parameter for FirStepLevel
 get fragmentthreshold              -- Display Fragment Threshold
 get frequency                      -- Display Radio Frequency (MHz)
 get gateway                        -- Display Gateway IP Address
 get gbeaconrate                    -- Display 11g Beacon Rate
 get gdraft5                        -- Display 11g Draft 5.0 compatibility
 get groupkeyupdate                 -- Display Group Key Update Interval (in Seconds)
 get hardware                       -- Display Hardware Revisions
 get hostipaddr                     -- Display Host IP Address
 get ipaddr                         -- Display IP Address
 get ipmask                         -- Display IP Subnet Mask
 get jsw                            -- Display Jumpstart Mode
 get jsP2PassPhrase                 -- Display JS-P2 passphrase
 get key                            -- Display Encryption Key
 get keyentrymethod                 -- Display Encyrption Key Entry Method
 get keysource                      -- Display Source Of Encryption Keys
 get ledStatus                      -- Display current LED status
 get login                          -- Display Login User Name
 get minimumrate                    -- Display Minimum Rate
 get nameaddr                       -- Display IP address of name server
 get nf                             -- Display Noise Floor
 get noiseImmunityLvl               -- Display ANI Parameter for Noise Immunity Level
 get ofdmTrigHigh                   -- Display Higher Trigger Threshold for OFDM Phy Errors for ANI Control
 get ofdmTrigLow                    -- Display Lower Trigger Threshold for OFDM Phy Errors for ANI Control
 get ofdmWeakSigDet                 -- Display ANI Parameter for OFDM Weak Signal Detection
 get overRidetxpower                -- Display Tx power override
 get operationMode                  -- Display Operation Mode
 get passphrase                     -- Display Passphrase
 get passphrasekey                  -- Display Passphrase Key
 get perfstats                      -- Dump system performance stats
 get pnetmon                        -- NetTask profile information
 get pktLogEnable                   -- Display Packet Logging Mode
 get power                          -- Display Transmit Power Setting
 get quietAckCtsAllow               -- Display if Ack/Cts frames are allowed during quiet period
 get quietDuration                  -- Display Duration of quiet period
 get quietOffset                    -- Display Offset of quiet period into the beacon period
 get radiusname                     -- Display RADIUS server name or IP address
 get radiusport                     -- Display RADIUS port number
 get rate                           -- Display Data Rate
 get reg                            -- Display the register contents at the given offset
 get remoteAp                       -- Display Remote Ap's Mac Address
 get reset                          -- Display # of resets
 get remoteWbr                      -- Display configured Remote Wireless bridges
 get hwtxretries                    -- Display HW Transmit Retry Limit
 get swtxretries                    -- Display SW Transmit Retry Limit
 get rtsthreshold                   -- Display RTS/CTS Threshold
 get seed                           -- Display Random Seed
 get shortpreamble                  -- Display Short Preamble Usage
 get shortslottime                  -- Display Short Slot Time Usage
 get sib                            -- Display Station Information
 get sntpserver                     -- Display SNTP/NTP Server IP Address
 get softwareretry                  -- Display Software Retry
 get spurImmunityLvl                -- Display ANI Parameter for Spur Immunity Level
 get ssid                           -- Display Service Set ID
 get ssidsuppress                   -- Display SSID Suppress Mode
 get station                        -- Display Station Status
 get SuperG                         -- Display SuperG Feature Status
 get systemname                     -- Display Access Point System Name
 get telnet                         -- Display Telnet Mode
 get timeout                        -- Display Telnet Timeout
 get times                          -- Display startup times
 get tzone                          -- Display Time Zone Setting
 get updateparam                    -- Display Vendor Default Firmware Update Params
 get uptime                         -- Display UpTime
 get vlan                           -- Display VLAN Mode
 get watchdog                       -- Display Watchdog Mode
 get wds                            -- Display WDS Mode
 get webUI                          -- Display WebUI Mode
 get wep                            -- Display Encryption Mode
 get wirelessmode                   -- Display Wireless LAN Mode
 get wmm                            -- Display WMM Mode
 get wmmParamBss                    -- Display WMM parameters used by STA in this BSS
 get wmmParam                       -- Display WMM parameters used by this AP
 get wlanstate                      -- Display wlan state
 help                               -- Display CLI Command List
 Lebradeb                           -- Disable reboot during radar detection
 ls                                 -- list directory
 logoff                             -- Logoff
 mem                                -- system memory statistics
 mv                                 -- Move file
 np                                 -- Network Performance
 ns                                 -- Network Performance Server
 ping                               -- Ping
 pktLog                             -- Packet Log
 radar!                             -- Simulate radar detection on current channel
 reboot                             -- Reboot Access Point
 rm                                 -- Remove file
 run                                -- Run command file
 task priority                      -- Set task priority
 task show                          -- Set task info
 task stack                         -- Set task stack info
 task resume                        -- resume task
 task suspend                       -- suspend task
 tftp                               -- Software update via TFTP
 quit                               -- Logoff
 set 11gonly                        -- Set 11g Only Allowed
 set 11goptimize                    -- Set 11g Optimization Level
 set 11goverlapbss                  -- Set Overlapping BSS Protection
 set abolt                          -- 
 set acl                            -- Set Access Control List
 set aging                          -- Set Aging Interval
 set antenna                        -- Set Antenna
 set authentication                 -- Set Authentication Type
 set autoProvision                  -- Set Auto-Provision Mode
 set autochannelselect              -- Set Auto Channel Selection
 set basic11b                       -- Set Use of Basic 11b Rates
 set basic11g                       -- Set Use of Basic 11g Rates
 set beaconinterval                 -- Modify Beacon Interval
 set burstSeqThreshold              -- Set Max Number of frames in a Burst
 set burstTime                      -- Set Burst Time
 set cachePerf                      -- Begin cache performance monitoring
 set calibration                    -- Set Calibration Period
 set cckTrigHigh                    -- Set Higher Trigger Threshold for CCK Phy Errors For ANI Control
 set cckTrigLow                     -- Set Lower Trigger Threshold for CCK Phy Errors For ANI Control
 set cckWeakSigThr                  -- Set ANI Parameter for CCK Weak Signal Detection Threshold
 set channel                        -- Set Radio Channel
 set cipher                         -- Set Cipher
 set compproc                       -- Set Compression Scheme
 set compwinsize                    -- Set Compression Window Size
 set countrycode                    -- Set Country Code
 set ctsmode                        -- Set CTS Mode
 set ctsrate                        -- Set CTS Rate
 set ctstype                        -- Set CTS Type
 set domainsuffix                   -- Set Domain Name Server Suffix
 set dtim                           -- Set Data Beacon Rate (DTIM)
 set dhcp                           -- Set DHCP Mode
 set enableANI                      -- Turn Adaptive Noise Immunity Control On/Off
 set encryption                     -- Set Encryption Mode
 set extendedchanmode               -- Set Extended Channel Mode
 set factorydefault                 -- Restore to Default Factory Settings
 set firStepLvl                     -- Set ANI Parameter for FirStepLevel
 set fragmentthreshold              -- Set Fragment Threshold
 set frequency                      -- Set Radio Frequency (MHz)
 set gateway                        -- Set Gateway IP Address
 set gbeaconrate                    -- Set 11g Beacon Rate
 set groupkeyupdate                 -- Set Group Key Update Interval (in Seconds)
 set gdraft5                        -- Set 11g Draft 5.0 compatibility
 set hostipaddr                     -- Set Host IP address
 set ipaddr                         -- Set IP Address
 set ipmask                         -- Set IP Subnet Mask
 set jsw                            -- Set Jumpstart Mode
 set jsp2Passwd                     -- Set JS-P2 password
 set key                            -- Set Encryption Key
 set keyentrymethod                 -- Select Encryption Key Entry Method
 set keysource                      -- Select Source Of Encryption Keys
 set login                          -- Modify Login User Name
 set minimumrate                    -- Set Minimum Rate
 set minimumrate                    -- Set Minimum Rate
 set minimumrate                    -- Set Minimum Rate
 set minimumrate                    -- Set Minimum Rate
 set minimumrate                    -- Set Minimum Rate
 set nameaddress                    -- Set Name Server IP address
 set noiseImmunityLvl               -- Set ANI Parameter for Noise Immunity Level
 set ofdmTrigHigh                   -- Set Higher Trigger Threshold for OFDM Phy Errors for ANI Control
 set ofdmTrigLow                    -- Set Lower Trigger Threshold for OFDM Phy Errors for ANI Control
 set ofdmWeakSigDet                 -- Set ANI Parameter for OFDM Weak Signal Detection
 set overRidetxpower                -- Set Tx power override
 set operationMode                  -- Set operation Mode
 set password                       -- Modify Password
 set passphrase                     -- Modify Passphrase
 set pktLogEnable                   -- Enable Packet Logging
 set power                          -- Set Transmit Power
 set quietAckCtsAllow               -- Allow Ack/Cts frames during quiet period
 set quietDuration                  -- Duration of quiet period
 set quietOffset                    -- Offset of quiet period into the beacon period
 set radiusname                     -- Set RADIUS name or IP address
 set radiusport                     -- Set RADIUS port number
 set radiussecret                   -- Set RADIUS shared secret
 set rate                           -- Set Data Rate
 set rate                           -- Set Data Rate
 set rate                           -- Set Data Rate
 set rate                           -- Set Data Rate
 set rate                           -- Set Data Rate
 set reg                            -- Set Register Value
 set regulatorydomain               -- Set Regulatory Domain
 set remoteAP                       -- Set Remote AP's Mac Address
 set hwtxretries                    -- Set HW Transmit Retry Limit
 set swtxretries                    -- Set SW Transmit Retry Limit
 set rtsthreshold                   -- Set RTS/CTS Threshold
 set shortpreamble                  -- Set Short Preamble
 set shortslottime                  -- Set Short Slot Time
 set sntpserver                     -- Set SNTP/NTP Server IP Address
 set softwareretry                  -- Set Software Retry
 set spurImmunityLvl                -- Set ANI Parameter for Spur Immunity Level
 set ssid                           -- Set Service Set ID
 set ssidsuppress                   -- Set SSID Suppress Mode
 set SuperG                         -- Super G Features 
 set systemname                     -- Set Access Point System Name
 set telnet                         -- Set Telnet Mode
 set timeout                        -- Set Telnet Timeout
 set tzone                          -- Set Time Zone Setting
 set updateparam                    -- Set Vendor Default Firmware Update Params
 set vlan                           -- Set VLAN Mode
 set watchdog                       -- Set Watchdog Mode
 set wds                            -- Set WDS Mode
 set webUI                          -- Set Web UI Mode
 set wep                            -- Set Encryption Mode
 set wlanstate                      -- Set wlan state
 set wirelessmode                   -- Set Wireless LAN Mode
 set wmm                            -- Set WMM Mode
 set wmmParamBss                    -- Set WMM parameters used by STAs in this BSS
 set wmmParam                       -- Set WMM parameters used by this AP
 spy report                         -- Print spy report
 spy show                           -- Print debug info
 spy start                          -- Start spy
 spy stop                           -- Stop spy
 start wlan                         -- Start the current wlan
 stop wlan                          -- Stop the current wlan
 support                            -- Print support information
 timeofday                          -- Display Current Time of Day
 v54 alg                            -- Set/show the antenna algorithm
 v54 ant                            -- Video54 Antenna Config
 v54 antreset                       -- Reset V54 TxCtrl State
 v54 rtt                            -- Real-time Telemetry output
 v54 fchan                          -- Fast Channel Change
 v54 emon                           -- Environmental Monitoring
 v54 learn                          -- Send V54 learning packets
 v54 queue                          -- Video54 Queuing Debug Info
 v54 reset                          -- Reset V54 TxCtrl State
 v54 staQueue                       -- Per-Station-Queue scheduling
 v54 staticant                      -- Configure a static antenna
 v54 staticant                      -- Configure a static antenna
 version                            -- Software version
 video classifier                   -- Classify
 video qos                          -- Quality Of Service
 video pcap                         -- Packet capture
wlan0 -> version
AP software 3.3.1.1481
p4build@BULLET:h:/atheros/ap/ap/os/vxworks/target/proj/ap-ar5315-production
Jul 17 2006, 17:48:58
wlan0 -> reboot
Rebooting AP...
flash page write circuit present !!!
ar531xPlus rev 0x00000086 firmware startup...
CTL Reg: 0x01060014
CTL Reg: 0x01160014
flash page write circuit present !!!
 Ple
GD6-5 version 4.0.0.167
     1
auto-booting...
Attaching to TFFS... done.
Loading /fl/apv54...1101040
Starting at 0x804846e0...
flash page write circuit present !!!

/fl/  - Volume is OK 
Reading Configuration File "/fl/apcfg".
apCfgOpModeSet(0, 0)
apcfg:0 set OpMode to Access Point
apCfgOpModeSet(1, 0)
apcfg:1 set OpMode to Access Point
Configuration file checksum: 5e36b is good
Setting MV Port 5 to 100 Full
^C^C^CPlease check the ethernet cable on port 0!
apInit call ar5hwcCreatePhy(0)
v54_antinfo_init: 6C: using max 3 of 6 = 41 states
v54_hwantctrl_init: 2316
Pinot+ Adaptive Control Algorithm, Copyright (C) 2003-2005, Video54 Technologies, Inc. All Rights Reserved.
Pinot+ Adaptive Control Algorithm, Copyright (C) 2003-2005, Video54 Technologies, Inc. All Rights Reserved.
apInit call ar5hwcCreatePhy(1)
Attaching interface lo0...done
Adding 5209 symbols for standalone.
                VxWorks
Copyright 1984-2001  Wind River Systems, Inc.
            CPU: GD6-5
   Runtime Name: VxWorks
Runtime Version: 5.4.20x
81fffdf0     (BSP version: 1.0
t        Created: RooJul 17 2006, 17:48:5tTask8): 
 netLibIni            WDB: tneReadytTaskSemId = 0x.
8038ee10
Video54 Ac
cess Point Rev 3.3.0x1.1481
81fffdf0v54 (AP software tRootTask3.3.1.1481): Cntlsizeof(ATHEROS_DESC)=
160 1.2 Copyright  CACHE_LINE_SIZE=p4b32uild
(C) 2005 Vide0x@81fffdf0o54 Techn (BULLETtRootTaskolo): :wireless access point starting...
h:/atheros/ap/ap/os/vxworks/target/proj/ap-ar5315-productiongi
es Inc.Jul 17 2006, 17:48:58
wlan0 -> Auto Channel Scan selected 2472 MHz, channel 13
0x81fffdf0 (tRootTask):  wlan0 Ready
0x81fffdf0 (tRootTask):  Ready
Invalid input characters!
wlan0 -> 
wlan0 -> 
wlan0 -> 
wlan0 -> help
List of Access Point CLI commands:
 ?                                  -- Display CLI Command List
 arp add                            -- create or modify ARP table entry
 arp delete                         -- remove ARP table entry
 arp flush                          -- flush all entries in the ARP table
 arp show                           -- Display firmware information
 board change                       -- Change Board Data
 board dump                         -- Dump Board Data
 add remoteWbr                      -- Add a remote Wireless Bridge
 admin                              -- Temporary factory admin
 boot flash                         -- Boot from flash
 boot ethernet                      -- Boot from network
 boot dump                          -- dump boot line data
 cat                                -- list file
 cp                                 -- Copy file
 config wlan                        -- config wlanX
 connect bss                        -- connect to bssX
 del acl                            -- Delete Access Control List
 del key                            -- Delete Encryption key
 del remoteWbr                      -- Delete a remote Wireless Bridge
 del seed                           -- Delete Random Seed
 dis                                -- Dis-associate an End Station
 eeprom                             -- dump eeprom data
 find bss                           -- Find BSS
 find channel                       -- Find Available Channel
 find all                           -- Find All BSS
 format                             -- Format flash filesytem
 bootrom                            -- Update boot rom image
 ftp                                -- Software update via FTP
 get 11gonly                        -- Display 11g Only Allowed
 get 11goptimize                    -- Display 11g Optimization Level
 get 11goverlapbss                  -- Display Overlapping BSS Protection
 get abolt                          -- 
 get acl                            -- Display Access Control List
 get aging                          -- Display Aging Interval
 get antenna                        -- Display Antenna Diversity
 get arp                            -- Display arp Table
 get if                             -- Display attached network interfaces
 get routes                         -- Display routing table 
 get association                    -- Display Association Table
 get authentication                 -- Display Authentication Type
 get autoProvision                  -- Display Auto-Provision Mode
 get autochannelselect              -- Display Auto Channel Select
 get basic11b                       -- Display Basic 11b Rates
 get basic11g                       -- Display Basic 11g Rates
 get beaconinterval                 -- Display Beacon Interval
 get bridgeTable                    -- Display internal SW bridge table
 get burstSeqThreshold              -- Display Max Number of frames in a Burst
 get burstTime                      -- Display Burst Time
 get cacheperf                      -- Display the cache performance counters
 get calibration                    -- Display Noise And Offset Calibration Mode
 get cckTrigHigh                    -- Display Higher Trigger Threshold for CCK Phy Errors for ANI Control
 get cckTrigLow                     -- Display Lower Trigger Threshold for CCK Phy Errors for ANI Control
 get cckWeakSigThr                  -- Display ANI Parameter for CCK Weak Signal Detection Threshold
 get channel                        -- Display Radio Channel
 get cipher                         -- Display Encryption cipher
 get compproc                       -- Display Compression scheme
 get compwinsize                    -- Display Compression Window Size
 get config                         -- Display Current AP Configuration
 get countrycode                    -- Display Country Code
 get ctsmode                        -- Display CTS mode
 get ctsrate                        -- Display CTS rate
 get ctstype                        -- Display CTS type
 get domainsuffix                   -- Display Domain Name Server suffix
 get dtim                           -- Display Data Beacon Rate (DTIM)
 get dhcp                           -- Display DHCP Client Mode
 get enableANI                      -- Display Adaptive Noise Immunity Control On/Off
 get encryption                     -- Display Encryption Mode
 get eth                            -- Display Ethernet Statistics
 get extendedchanmode               -- Display Extended Channel Mode
 get firStepLvl                     -- Display ANI Parameter for FirStepLevel
 get fragmentthreshold              -- Display Fragment Threshold
 get frequency                      -- Display Radio Frequency (MHz)
 get gateway                        -- Display Gateway IP Address
 get gbeaconrate                    -- Display 11g Beacon Rate
 get gdraft5                        -- Display 11g Draft 5.0 compatibility
 get groupkeyupdate                 -- Display Group Key Update Interval (in Seconds)
 get hardware                       -- Display Hardware Revisions
 get hostipaddr                     -- Display Host IP Address
 get ipaddr                         -- Display IP Address
 get ipmask                         -- Display IP Subnet Mask
 get jsw                            -- Display Jumpstart Mode
 get jsP2PassPhrase                 -- Display JS-P2 passphrase
 get key                            -- Display Encryption Key
 get keyentrymethod                 -- Display Encyrption Key Entry Method
 get keysource                      -- Display Source Of Encryption Keys
 get ledStatus                      -- Display current LED status
 get login                          -- Display Login User Name
 get minimumrate                    -- Display Minimum Rate
 get nameaddr                       -- Display IP address of name server
 get nf                             -- Display Noise Floor
 get noiseImmunityLvl               -- Display ANI Parameter for Noise Immunity Level
 get ofdmTrigHigh                   -- Display Higher Trigger Threshold for OFDM Phy Errors for ANI Control
 get ofdmTrigLow                    -- Display Lower Trigger Threshold for OFDM Phy Errors for ANI Control
 get ofdmWeakSigDet                 -- Display ANI Parameter for OFDM Weak Signal Detection
 get overRidetxpower                -- Display Tx power override
 get operationMode                  -- Display Operation Mode
 get passphrase                     -- Display Passphrase
 get passphrasekey                  -- Display Passphrase Key
 get perfstats                      -- Dump system performance stats
 get pnetmon                        -- NetTask profile information
 get pktLogEnable                   -- Display Packet Logging Mode
 get power                          -- Display Transmit Power Setting
 get quietAckCtsAllow               -- Display if Ack/Cts frames are allowed during quiet period
 get quietDuration                  -- Display Duration of quiet period
 get quietOffset                    -- Display Offset of quiet period into the beacon period
 get radiusname                     -- Display RADIUS server name or IP address
 get radiusport                     -- Display RADIUS port number
 get rate                           -- Display Data Rate
 get reg                            -- Display the register contents at the given offset
 get remoteAp                       -- Display Remote Ap's Mac Address
 get reset                          -- Display # of resets
 get remoteWbr                      -- Display configured Remote Wireless bridges
 get hwtxretries                    -- Display HW Transmit Retry Limit
 get swtxretries                    -- Display SW Transmit Retry Limit
 get rtsthreshold                   -- Display RTS/CTS Threshold
 get seed                           -- Display Random Seed
 get shortpreamble                  -- Display Short Preamble Usage
 get shortslottime                  -- Display Short Slot Time Usage
 get sib                            -- Display Station Information
 get sntpserver                     -- Display SNTP/NTP Server IP Address
 get softwareretry                  -- Display Software Retry
 get spurImmunityLvl                -- Display ANI Parameter for Spur Immunity Level
 get ssid                           -- Display Service Set ID
 get ssidsuppress                   -- Display SSID Suppress Mode
 get station                        -- Display Station Status
 get SuperG                         -- Display SuperG Feature Status
 get systemname                     -- Display Access Point System Name
 get telnet                         -- Display Telnet Mode
 get timeout                        -- Display Telnet Timeout
 get times                          -- Display startup times
 get tzone                          -- Display Time Zone Setting
 get updateparam                    -- Display Vendor Default Firmware Update Params
 get uptime                         -- Display UpTime
 get vlan                           -- Display VLAN Mode
 get watchdog                       -- Display Watchdog Mode
 get wds                            -- Display WDS Mode
 get webUI                          -- Display WebUI Mode
 get wep                            -- Display Encryption Mode
 get wirelessmode                   -- Display Wireless LAN Mode
 get wmm                            -- Display WMM Mode
 get wmmParamBss                    -- Display WMM parameters used by STA in this BSS
 get wmmParam                       -- Display WMM parameters used by this AP
 get wlanstate                      -- Display wlan state
 help                               -- Display CLI Command List
 Lebradeb                           -- Disable reboot during radar detection
 ls                                 -- list directory
 logoff                             -- Logoff
 mem                                -- system memory statistics
 mv                                 -- Move file
 np                                 -- Network Performance
 ns                                 -- Network Performance Server
 ping                               -- Ping
 pktLog                             -- Packet Log
 radar!                             -- Simulate radar detection on current channel
 reboot                             -- Reboot Access Point
 rm                                 -- Remove file
 run                                -- Run command file
 task priority                      -- Set task priority
 task show                          -- Set task info
 task stack                         -- Set task stack info
 task resume                        -- resume task
 task suspend                       -- suspend task
 tftp                               -- Software update via TFTP
 quit                               -- Logoff
 set 11gonly                        -- Set 11g Only Allowed
 set 11goptimize                    -- Set 11g Optimization Level
 set 11goverlapbss                  -- Set Overlapping BSS Protection
 set abolt                          -- 
 set acl                            -- Set Access Control List
 set aging                          -- Set Aging Interval
 set antenna                        -- Set Antenna
 set authentication                 -- Set Authentication Type
 set autoProvision                  -- Set Auto-Provision Mode
 set autochannelselect              -- Set Auto Channel Selection
 set basic11b                       -- Set Use of Basic 11b Rates
 set basic11g                       -- Set Use of Basic 11g Rates
 set beaconinterval                 -- Modify Beacon Interval
 set burstSeqThreshold              -- Set Max Number of frames in a Burst
 set burstTime                      -- Set Burst Time
 set cachePerf                      -- Begin cache performance monitoring
 set calibration                    -- Set Calibration Period
 set cckTrigHigh                    -- Set Higher Trigger Threshold for CCK Phy Errors For ANI Control
 set cckTrigLow                     -- Set Lower Trigger Threshold for CCK Phy Errors For ANI Control
 set cckWeakSigThr                  -- Set ANI Parameter for CCK Weak Signal Detection Threshold
 set channel                        -- Set Radio Channel
 set cipher                         -- Set Cipher
 set compproc                       -- Set Compression Scheme
 set compwinsize                    -- Set Compression Window Size
 set countrycode                    -- Set Country Code
 set ctsmode                        -- Set CTS Mode
 set ctsrate                        -- Set CTS Rate
 set ctstype                        -- Set CTS Type
 set domainsuffix                   -- Set Domain Name Server Suffix
 set dtim                           -- Set Data Beacon Rate (DTIM)
 set dhcp                           -- Set DHCP Mode
 set enableANI                      -- Turn Adaptive Noise Immunity Control On/Off
 set encryption                     -- Set Encryption Mode
 set extendedchanmode               -- Set Extended Channel Mode
 set factorydefault                 -- Restore to Default Factory Settings
 set firStepLvl                     -- Set ANI Parameter for FirStepLevel
 set fragmentthreshold              -- Set Fragment Threshold
 set frequency                      -- Set Radio Frequency (MHz)
 set gateway                        -- Set Gateway IP Address
 set gbeaconrate                    -- Set 11g Beacon Rate
 set groupkeyupdate                 -- Set Group Key Update Interval (in Seconds)
 set gdraft5                        -- Set 11g Draft 5.0 compatibility
 set hostipaddr                     -- Set Host IP address
 set ipaddr                         -- Set IP Address
 set ipmask                         -- Set IP Subnet Mask
 set jsw                            -- Set Jumpstart Mode
 set jsp2Passwd                     -- Set JS-P2 password
 set key                            -- Set Encryption Key
 set keyentrymethod                 -- Select Encryption Key Entry Method
 set keysource                      -- Select Source Of Encryption Keys
 set login                          -- Modify Login User Name
 set minimumrate                    -- Set Minimum Rate
 set minimumrate                    -- Set Minimum Rate
 set minimumrate                    -- Set Minimum Rate
 set minimumrate                    -- Set Minimum Rate
 set minimumrate                    -- Set Minimum Rate
 set nameaddress                    -- Set Name Server IP address
 set noiseImmunityLvl               -- Set ANI Parameter for Noise Immunity Level
 set ofdmTrigHigh                   -- Set Higher Trigger Threshold for OFDM Phy Errors for ANI Control
 set ofdmTrigLow                    -- Set Lower Trigger Threshold for OFDM Phy Errors for ANI Control
 set ofdmWeakSigDet                 -- Set ANI Parameter for OFDM Weak Signal Detection
 set overRidetxpower                -- Set Tx power override
 set operationMode                  -- Set operation Mode
 set password                       -- Modify Password
 set passphrase                     -- Modify Passphrase
 set pktLogEnable                   -- Enable Packet Logging
 set power                          -- Set Transmit Power
 set quietAckCtsAllow               -- Allow Ack/Cts frames during quiet period
 set quietDuration                  -- Duration of quiet period
 set quietOffset                    -- Offset of quiet period into the beacon period
 set radiusname                     -- Set RADIUS name or IP address
 set radiusport                     -- Set RADIUS port number
 set radiussecret                   -- Set RADIUS shared secret
 set rate                           -- Set Data Rate
 set rate                           -- Set Data Rate
 set rate                           -- Set Data Rate
 set rate                           -- Set Data Rate
 set rate                           -- Set Data Rate
 set reg                            -- Set Register Value
 set regulatorydomain               -- Set Regulatory Domain
 set remoteAP                       -- Set Remote AP's Mac Address
 set hwtxretries                    -- Set HW Transmit Retry Limit
 set swtxretries                    -- Set SW Transmit Retry Limit
 set rtsthreshold                   -- Set RTS/CTS Threshold
 set shortpreamble                  -- Set Short Preamble
 set shortslottime                  -- Set Short Slot Time
 set sntpserver                     -- Set SNTP/NTP Server IP Address
 set softwareretry                  -- Set Software Retry
 set spurImmunityLvl                -- Set ANI Parameter for Spur Immunity Level
 set ssid                           -- Set Service Set ID
 set ssidsuppress                   -- Set SSID Suppress Mode
 set SuperG                         -- Super G Features 
 set systemname                     -- Set Access Point System Name
 set telnet                         -- Set Telnet Mode
 set timeout                        -- Set Telnet Timeout
 set tzone                          -- Set Time Zone Setting
 set updateparam                    -- Set Vendor Default Firmware Update Params
 set vlan                           -- Set VLAN Mode
 set watchdog                       -- Set Watchdog Mode
 set wds                            -- Set WDS Mode
 set webUI                          -- Set Web UI Mode
 set wep                            -- Set Encryption Mode
 set wlanstate                      -- Set wlan state
 set wirelessmode                   -- Set Wireless LAN Mode
 set wmm                            -- Set WMM Mode
 set wmmParamBss                    -- Set WMM parameters used by STAs in this BSS
 set wmmParam                       -- Set WMM parameters used by this AP
 spy report                         -- Print spy report
 spy show                           -- Print debug info
 spy start                          -- Start spy
 spy stop                           -- Stop spy
 start wlan                         -- Start the current wlan
 stop wlan                          -- Stop the current wlan
 support                            -- Print support information
 timeofday                          -- Display Current Time of Day
 v54 alg                            -- Set/show the antenna algorithm
 v54 ant                            -- Video54 Antenna Config
 v54 antreset                       -- Reset V54 TxCtrl State
 v54 rtt                            -- Real-time Telemetry output
 v54 fchan                          -- Fast Channel Change
 v54 emon                           -- Environmental Monitoring
 v54 learn                          -- Send V54 learning packets
 v54 queue                          -- Video54 Queuing Debug Info
 v54 reset                          -- Reset V54 TxCtrl State
 v54 staQueue                       -- Per-Station-Queue scheduling
 v54 staticant                      -- Configure a static antenna
 v54 staticant                      -- Configure a static antenna
 version                            -- Software version
 video classifier                   -- Classify
 video qos                          -- Quality Of Service
 video pcap                         -- Packet capture
wlan0 -> bootrom
Not enough parameters!
wlan0 -> ^[[A
Invalid input characters!
wlan0 -> 
wlan0 -> help
List of Access Point CLI commands:
 ?                                  -- Display CLI Command List
 arp add                            -- create or modify ARP table entry
 arp delete                         -- remove ARP table entry
 arp flush                          -- flush all entries in the ARP table
 arp show                           -- Display firmware information
 board change                       -- Change Board Data
 board dump                         -- Dump Board Data
 add remoteWbr                      -- Add a remote Wireless Bridge
 admin                              -- Temporary factory admin
 boot flash                         -- Boot from flash
 boot ethernet                      -- Boot from network
 boot dump                          -- dump boot line data
 cat                                -- list file
 cp                                 -- Copy file
 config wlan                        -- config wlanX
 connect bss                        -- connect to bssX
 del acl                            -- Delete Access Control List
 del key                            -- Delete Encryption key
 del remoteWbr                      -- Delete a remote Wireless Bridge
 del seed                           -- Delete Random Seed
 dis                                -- Dis-associate an End Station
 eeprom                             -- dump eeprom data
 find bss                           -- Find BSS
 find channel                       -- Find Available Channel
 find all                           -- Find All BSS
 format                             -- Format flash filesytem
 bootrom                            -- Update boot rom image
 ftp                                -- Software update via FTP
 get 11gonly                        -- Display 11g Only Allowed
 get 11goptimize                    -- Display 11g Optimization Level
 get 11goverlapbss                  -- Display Overlapping BSS Protection
 get abolt                          -- 
 get acl                            -- Display Access Control List
 get aging                          -- Display Aging Interval
 get antenna                        -- Display Antenna Diversity
 get arp                            -- Display arp Table
 get if                             -- Display attached network interfaces
 get routes                         -- Display routing table 
 get association                    -- Display Association Table
 get authentication                 -- Display Authentication Type
 get autoProvision                  -- Display Auto-Provision Mode
 get autochannelselect              -- Display Auto Channel Select
 get basic11b                       -- Display Basic 11b Rates
 get basic11g                       -- Display Basic 11g Rates
 get beaconinterval                 -- Display Beacon Interval
 get bridgeTable                    -- Display internal SW bridge table
 get burstSeqThreshold              -- Display Max Number of frames in a Burst
 get burstTime                      -- Display Burst Time
 get cacheperf                      -- Display the cache performance counters
 get calibration                    -- Display Noise And Offset Calibration Mode
 get cckTrigHigh                    -- Display Higher Trigger Threshold for CCK Phy Errors for ANI Control
 get cckTrigLow                     -- Display Lower Trigger Threshold for CCK Phy Errors for ANI Control
 get cckWeakSigThr                  -- Display ANI Parameter for CCK Weak Signal Detection Threshold
 get channel                        -- Display Radio Channel
 get cipher                         -- Display Encryption cipher
 get compproc                       -- Display Compression scheme
 get compwinsize                    -- Display Compression Window Size
 get config                         -- Display Current AP Configuration
 get countrycode                    -- Display Country Code
 get ctsmode                        -- Display CTS mode
 get ctsrate                        -- Display CTS rate
 get ctstype                        -- Display CTS type
 get domainsuffix                   -- Display Domain Name Server suffix
 get dtim                           -- Display Data Beacon Rate (DTIM)
 get dhcp                           -- Display DHCP Client Mode
 get enableANI                      -- Display Adaptive Noise Immunity Control On/Off
 get encryption                     -- Display Encryption Mode
 get eth                            -- Display Ethernet Statistics
 get extendedchanmode               -- Display Extended Channel Mode
 get firStepLvl                     -- Display ANI Parameter for FirStepLevel
 get fragmentthreshold              -- Display Fragment Threshold
 get frequency                      -- Display Radio Frequency (MHz)
 get gateway                        -- Display Gateway IP Address
 get gbeaconrate                    -- Display 11g Beacon Rate
 get gdraft5                        -- Display 11g Draft 5.0 compatibility
 get groupkeyupdate                 -- Display Group Key Update Interval (in Seconds)
 get hardware                       -- Display Hardware Revisions
 get hostipaddr                     -- Display Host IP Address
 get ipaddr                         -- Display IP Address
 get ipmask                         -- Display IP Subnet Mask
 get jsw                            -- Display Jumpstart Mode
 get jsP2PassPhrase                 -- Display JS-P2 passphrase
 get key                            -- Display Encryption Key
 get keyentrymethod                 -- Display Encyrption Key Entry Method
 get keysource                      -- Display Source Of Encryption Keys
 get ledStatus                      -- Display current LED status
 get login                          -- Display Login User Name
 get minimumrate                    -- Display Minimum Rate
 get nameaddr                       -- Display IP address of name server
 get nf                             -- Display Noise Floor
 get noiseImmunityLvl               -- Display ANI Parameter for Noise Immunity Level
 get ofdmTrigHigh                   -- Display Higher Trigger Threshold for OFDM Phy Errors for ANI Control
 get ofdmTrigLow                    -- Display Lower Trigger Threshold for OFDM Phy Errors for ANI Control
 get ofdmWeakSigDet                 -- Display ANI Parameter for OFDM Weak Signal Detection
 get overRidetxpower                -- Display Tx power override
 get operationMode                  -- Display Operation Mode
 get passphrase                     -- Display Passphrase
 get passphrasekey                  -- Display Passphrase Key
 get perfstats                      -- Dump system performance stats
 get pnetmon                        -- NetTask profile information
 get pktLogEnable                   -- Display Packet Logging Mode
 get power                          -- Display Transmit Power Setting
 get quietAckCtsAllow               -- Display if Ack/Cts frames are allowed during quiet period
 get quietDuration                  -- Display Duration of quiet period
 get quietOffset                    -- Display Offset of quiet period into the beacon period
 get radiusname                     -- Display RADIUS server name or IP address
 get radiusport                     -- Display RADIUS port number
 get rate                           -- Display Data Rate
 get reg                            -- Display the register contents at the given offset
 get remoteAp                       -- Display Remote Ap's Mac Address
 get reset                          -- Display # of resets
 get remoteWbr                      -- Display configured Remote Wireless bridges
 get hwtxretries                    -- Display HW Transmit Retry Limit
 get swtxretries                    -- Display SW Transmit Retry Limit
 get rtsthreshold                   -- Display RTS/CTS Threshold
 get seed                           -- Display Random Seed
 get shortpreamble                  -- Display Short Preamble Usage
 get shortslottime                  -- Display Short Slot Time Usage
 get sib                            -- Display Station Information
 get sntpserver                     -- Display SNTP/NTP Server IP Address
 get softwareretry                  -- Display Software Retry
 get spurImmunityLvl                -- Display ANI Parameter for Spur Immunity Level
 get ssid                           -- Display Service Set ID
 get ssidsuppress                   -- Display SSID Suppress Mode
 get station                        -- Display Station Status
 get SuperG                         -- Display SuperG Feature Status
 get systemname                     -- Display Access Point System Name
 get telnet                         -- Display Telnet Mode
 get timeout                        -- Display Telnet Timeout
 get times                          -- Display startup times
 get tzone                          -- Display Time Zone Setting
 get updateparam                    -- Display Vendor Default Firmware Update Params
 get uptime                         -- Display UpTime
 get vlan                           -- Display VLAN Mode
 get watchdog                       -- Display Watchdog Mode
 get wds                            -- Display WDS Mode
 get webUI                          -- Display WebUI Mode
 get wep                            -- Display Encryption Mode
 get wirelessmode                   -- Display Wireless LAN Mode
 get wmm                            -- Display WMM Mode
 get wmmParamBss                    -- Display WMM parameters used by STA in this BSS
 get wmmParam                       -- Display WMM parameters used by this AP
 get wlanstate                      -- Display wlan state
 help                               -- Display CLI Command List
 Lebradeb                           -- Disable reboot during radar detection
 ls                                 -- list directory
 logoff                             -- Logoff
 mem                                -- system memory statistics
 mv                                 -- Move file
 np                                 -- Network Performance
 ns                                 -- Network Performance Server
 ping                               -- Ping
 pktLog                             -- Packet Log
 radar!                             -- Simulate radar detection on current channel
 reboot                             -- Reboot Access Point
 rm                                 -- Remove file
 run                                -- Run command file
 task priority                      -- Set task priority
 task show                          -- Set task info
 task stack                         -- Set task stack info
 task resume                        -- resume task
 task suspend                       -- suspend task
 tftp                               -- Software update via TFTP
 quit                               -- Logoff
 set 11gonly                        -- Set 11g Only Allowed
 set 11goptimize                    -- Set 11g Optimization Level
 set 11goverlapbss                  -- Set Overlapping BSS Protection
 set abolt                          -- 
 set acl                            -- Set Access Control List
 set aging                          -- Set Aging Interval
 set antenna                        -- Set Antenna
 set authentication                 -- Set Authentication Type
 set autoProvision                  -- Set Auto-Provision Mode
 set autochannelselect              -- Set Auto Channel Selection
 set basic11b                       -- Set Use of Basic 11b Rates
 set basic11g                       -- Set Use of Basic 11g Rates
 set beaconinterval                 -- Modify Beacon Interval
 set burstSeqThreshold              -- Set Max Number of frames in a Burst
 set burstTime                      -- Set Burst Time
 set cachePerf                      -- Begin cache performance monitoring
 set calibration                    -- Set Calibration Period
 set cckTrigHigh                    -- Set Higher Trigger Threshold for CCK Phy Errors For ANI Control
 set cckTrigLow                     -- Set Lower Trigger Threshold for CCK Phy Errors For ANI Control
 set cckWeakSigThr                  -- Set ANI Parameter for CCK Weak Signal Detection Threshold
 set channel                        -- Set Radio Channel
 set cipher                         -- Set Cipher
 set compproc                       -- Set Compression Scheme
 set compwinsize                    -- Set Compression Window Size
 set countrycode                    -- Set Country Code
 set ctsmode                        -- Set CTS Mode
 set ctsrate                        -- Set CTS Rate
 set ctstype                        -- Set CTS Type
 set domainsuffix                   -- Set Domain Name Server Suffix
 set dtim                           -- Set Data Beacon Rate (DTIM)
 set dhcp                           -- Set DHCP Mode
 set enableANI                      -- Turn Adaptive Noise Immunity Control On/Off
 set encryption                     -- Set Encryption Mode
 set extendedchanmode               -- Set Extended Channel Mode
 set factorydefault                 -- Restore to Default Factory Settings
 set firStepLvl                     -- Set ANI Parameter for FirStepLevel
 set fragmentthreshold              -- Set Fragment Threshold
 set frequency                      -- Set Radio Frequency (MHz)
 set gateway                        -- Set Gateway IP Address
 set gbeaconrate                    -- Set 11g Beacon Rate
 set groupkeyupdate                 -- Set Group Key Update Interval (in Seconds)
 set gdraft5                        -- Set 11g Draft 5.0 compatibility
 set hostipaddr                     -- Set Host IP address
 set ipaddr                         -- Set IP Address
 set ipmask                         -- Set IP Subnet Mask
 set jsw                            -- Set Jumpstart Mode
 set jsp2Passwd                     -- Set JS-P2 password
 set key                            -- Set Encryption Key
 set keyentrymethod                 -- Select Encryption Key Entry Method
 set keysource                      -- Select Source Of Encryption Keys
 set login                          -- Modify Login User Name
 set minimumrate                    -- Set Minimum Rate
 set minimumrate                    -- Set Minimum Rate
 set minimumrate                    -- Set Minimum Rate
 set minimumrate                    -- Set Minimum Rate
 set minimumrate                    -- Set Minimum Rate
 set nameaddress                    -- Set Name Server IP address
 set noiseImmunityLvl               -- Set ANI Parameter for Noise Immunity Level
 set ofdmTrigHigh                   -- Set Higher Trigger Threshold for OFDM Phy Errors for ANI Control
 set ofdmTrigLow                    -- Set Lower Trigger Threshold for OFDM Phy Errors for ANI Control
 set ofdmWeakSigDet                 -- Set ANI Parameter for OFDM Weak Signal Detection
 set overRidetxpower                -- Set Tx power override
 set operationMode                  -- Set operation Mode
 set password                       -- Modify Password
 set passphrase                     -- Modify Passphrase
 set pktLogEnable                   -- Enable Packet Logging
 set power                          -- Set Transmit Power
 set quietAckCtsAllow               -- Allow Ack/Cts frames during quiet period
 set quietDuration                  -- Duration of quiet period
 set quietOffset                    -- Offset of quiet period into the beacon period
 set radiusname                     -- Set RADIUS name or IP address
 set radiusport                     -- Set RADIUS port number
 set radiussecret                   -- Set RADIUS shared secret
 set rate                           -- Set Data Rate
 set rate                           -- Set Data Rate
 set rate                           -- Set Data Rate
 set rate                           -- Set Data Rate
 set rate                           -- Set Data Rate
 set reg                            -- Set Register Value
 set regulatorydomain               -- Set Regulatory Domain
 set remoteAP                       -- Set Remote AP's Mac Address
 set hwtxretries                    -- Set HW Transmit Retry Limit
 set swtxretries                    -- Set SW Transmit Retry Limit
 set rtsthreshold                   -- Set RTS/CTS Threshold
 set shortpreamble                  -- Set Short Preamble
 set shortslottime                  -- Set Short Slot Time
 set sntpserver                     -- Set SNTP/NTP Server IP Address
 set softwareretry                  -- Set Software Retry
 set spurImmunityLvl                -- Set ANI Parameter for Spur Immunity Level
 set ssid                           -- Set Service Set ID
 set ssidsuppress                   -- Set SSID Suppress Mode
 set SuperG                         -- Super G Features 
 set systemname                     -- Set Access Point System Name
 set telnet                         -- Set Telnet Mode
 set timeout                        -- Set Telnet Timeout
 set tzone                          -- Set Time Zone Setting
 set updateparam                    -- Set Vendor Default Firmware Update Params
 set vlan                           -- Set VLAN Mode
 set watchdog                       -- Set Watchdog Mode
 set wds                            -- Set WDS Mode
 set webUI                          -- Set Web UI Mode
 set wep                            -- Set Encryption Mode
 set wlanstate                      -- Set wlan state
 set wirelessmode                   -- Set Wireless LAN Mode
 set wmm                            -- Set WMM Mode
 set wmmParamBss                    -- Set WMM parameters used by STAs in this BSS
 set wmmParam                       -- Set WMM parameters used by this AP
 spy report                         -- Print spy report
 spy show                           -- Print debug info
 spy start                          -- Start spy
 spy stop                           -- Stop spy
 start wlan                         -- Start the current wlan
 stop wlan                          -- Stop the current wlan
 support                            -- Print support information
 timeofday                          -- Display Current Time of Day
 v54 alg                            -- Set/show the antenna algorithm
 v54 ant                            -- Video54 Antenna Config
 v54 antreset                       -- Reset V54 TxCtrl State
 v54 rtt                            -- Real-time Telemetry output
 v54 fchan                          -- Fast Channel Change
 v54 emon                           -- Environmental Monitoring
 v54 learn                          -- Send V54 learning packets
 v54 queue                          -- Video54 Queuing Debug Info
 v54 reset                          -- Reset V54 TxCtrl State
 v54 staQueue                       -- Per-Station-Queue scheduling
 v54 staticant                      -- Configure a static antenna
 v54 staticant                      -- Configure a static antenna
 version                            -- Software version
 video classifier                   -- Classify
 video qos                          -- Quality Of Service
 video pcap                         -- Packet capture
wlan0 -> boot ethernet
Invalid input characters!
wlan0 -> boot
Invalid input characters!
wlan0 -> help boot
List of Access Point CLI commands:
 ?                                  -- Display CLI Command List
 arp add                            -- create or modify ARP table entry
 arp delete                         -- remove ARP table entry
 arp flush                          -- flush all entries in the ARP table
 arp show                           -- Display firmware information
 board change                       -- Change Board Data
 board dump                         -- Dump Board Data
 add remoteWbr                      -- Add a remote Wireless Bridge
 admin                              -- Temporary factory admin
 boot flash                         -- Boot from flash
 boot ethernet                      -- Boot from network
 boot dump                          -- dump boot line data
 cat                                -- list file
 cp                                 -- Copy file
 config wlan                        -- config wlanX
 connect bss                        -- connect to bssX
 del acl                            -- Delete Access Control List
 del key                            -- Delete Encryption key
 del remoteWbr                      -- Delete a remote Wireless Bridge
 del seed                           -- Delete Random Seed
 dis                                -- Dis-associate an End Station
 eeprom                             -- dump eeprom data
 find bss                           -- Find BSS
 find channel                       -- Find Available Channel
 find all                           -- Find All BSS
 format                             -- Format flash filesytem
 bootrom                            -- Update boot rom image
 ftp                                -- Software update via FTP
 get 11gonly                        -- Display 11g Only Allowed
 get 11goptimize                    -- Display 11g Optimization Level
 get 11goverlapbss                  -- Display Overlapping BSS Protection
 get abolt                          -- 
 get acl                            -- Display Access Control List
 get aging                          -- Display Aging Interval
 get antenna                        -- Display Antenna Diversity
 get arp                            -- Display arp Table
 get if                             -- Display attached network interfaces
 get routes                         -- Display routing table 
 get association                    -- Display Association Table
 get authentication                 -- Display Authentication Type
 get autoProvision                  -- Display Auto-Provision Mode
 get autochannelselect              -- Display Auto Channel Select
 get basic11b                       -- Display Basic 11b Rates
 get basic11g                       -- Display Basic 11g Rates
 get beaconinterval                 -- Display Beacon Interval
 get bridgeTable                    -- Display internal SW bridge table
 get burstSeqThreshold              -- Display Max Number of frames in a Burst
 get burstTime                      -- Display Burst Time
 get cacheperf                      -- Display the cache performance counters
 get calibration                    -- Display Noise And Offset Calibration Mode
 get cckTrigHigh                    -- Display Higher Trigger Threshold for CCK Phy Errors for ANI Control
 get cckTrigLow                     -- Display Lower Trigger Threshold for CCK Phy Errors for ANI Control
 get cckWeakSigThr                  -- Display ANI Parameter for CCK Weak Signal Detection Threshold
 get channel                        -- Display Radio Channel
 get cipher                         -- Display Encryption cipher
 get compproc                       -- Display Compression scheme
 get compwinsize                    -- Display Compression Window Size
 get config                         -- Display Current AP Configuration
 get countrycode                    -- Display Country Code
 get ctsmode                        -- Display CTS mode
 get ctsrate                        -- Display CTS rate
 get ctstype                        -- Display CTS type
 get domainsuffix                   -- Display Domain Name Server suffix
 get dtim                           -- Display Data Beacon Rate (DTIM)
 get dhcp                           -- Display DHCP Client Mode
 get enableANI                      -- Display Adaptive Noise Immunity Control On/Off
 get encryption                     -- Display Encryption Mode
 get eth                            -- Display Ethernet Statistics
 get extendedchanmode               -- Display Extended Channel Mode
 get firStepLvl                     -- Display ANI Parameter for FirStepLevel
 get fragmentthreshold              -- Display Fragment Threshold
 get frequency                      -- Display Radio Frequency (MHz)
 get gateway                        -- Display Gateway IP Address
 get gbeaconrate                    -- Display 11g Beacon Rate
 get gdraft5                        -- Display 11g Draft 5.0 compatibility
 get groupkeyupdate                 -- Display Group Key Update Interval (in Seconds)
 get hardware                       -- Display Hardware Revisions
 get hostipaddr                     -- Display Host IP Address
 get ipaddr                         -- Display IP Address
 get ipmask                         -- Display IP Subnet Mask
 get jsw                            -- Display Jumpstart Mode
 get jsP2PassPhrase                 -- Display JS-P2 passphrase
 get key                            -- Display Encryption Key
 get keyentrymethod                 -- Display Encyrption Key Entry Method
 get keysource                      -- Display Source Of Encryption Keys
 get ledStatus                      -- Display current LED status
 get login                          -- Display Login User Name
 get minimumrate                    -- Display Minimum Rate
 get nameaddr                       -- Display IP address of name server
 get nf                             -- Display Noise Floor
 get noiseImmunityLvl               -- Display ANI Parameter for Noise Immunity Level
 get ofdmTrigHigh                   -- Display Higher Trigger Threshold for OFDM Phy Errors for ANI Control
 get ofdmTrigLow                    -- Display Lower Trigger Threshold for OFDM Phy Errors for ANI Control
 get ofdmWeakSigDet                 -- Display ANI Parameter for OFDM Weak Signal Detection
 get overRidetxpower                -- Display Tx power override
 get operationMode                  -- Display Operation Mode
 get passphrase                     -- Display Passphrase
 get passphrasekey                  -- Display Passphrase Key
 get perfstats                      -- Dump system performance stats
 get pnetmon                        -- NetTask profile information
 get pktLogEnable                   -- Display Packet Logging Mode
 get power                          -- Display Transmit Power Setting
 get quietAckCtsAllow               -- Display if Ack/Cts frames are allowed during quiet period
 get quietDuration                  -- Display Duration of quiet period
 get quietOffset                    -- Display Offset of quiet period into the beacon period
 get radiusname                     -- Display RADIUS server name or IP address
 get radiusport                     -- Display RADIUS port number
 get rate                           -- Display Data Rate
 get reg                            -- Display the register contents at the given offset
 get remoteAp                       -- Display Remote Ap's Mac Address
 get reset                          -- Display # of resets
 get remoteWbr                      -- Display configured Remote Wireless bridges
 get hwtxretries                    -- Display HW Transmit Retry Limit
 get swtxretries                    -- Display SW Transmit Retry Limit
 get rtsthreshold                   -- Display RTS/CTS Threshold
 get seed                           -- Display Random Seed
 get shortpreamble                  -- Display Short Preamble Usage
 get shortslottime                  -- Display Short Slot Time Usage
 get sib                            -- Display Station Information
 get sntpserver                     -- Display SNTP/NTP Server IP Address
 get softwareretry                  -- Display Software Retry
 get spurImmunityLvl                -- Display ANI Parameter for Spur Immunity Level
 get ssid                           -- Display Service Set ID
 get ssidsuppress                   -- Display SSID Suppress Mode
 get station                        -- Display Station Status
 get SuperG                         -- Display SuperG Feature Status
 get systemname                     -- Display Access Point System Name
 get telnet                         -- Display Telnet Mode
 get timeout                        -- Display Telnet Timeout
 get times                          -- Display startup times
 get tzone                          -- Display Time Zone Setting
 get updateparam                    -- Display Vendor Default Firmware Update Params
 get uptime                         -- Display UpTime
 get vlan                           -- Display VLAN Mode
 get watchdog                       -- Display Watchdog Mode
 get wds                            -- Display WDS Mode
 get webUI                          -- Display WebUI Mode
 get wep                            -- Display Encryption Mode
 get wirelessmode                   -- Display Wireless LAN Mode
 get wmm                            -- Display WMM Mode
 get wmmParamBss ac                 -- Get EDCA values for this access class
 get wmmParam ac                    -- Get EDCA values for this access class
 get wmmParam queue                 -- Get EDCA values for this HW queue
 get wlanstate                      -- Display wlan state
 help                               -- Display CLI Command List
 Lebradeb                           -- Disable reboot during radar detection
 ls                                 -- list directory
 logoff                             -- Logoff
 mem                                -- system memory statistics
 mv                                 -- Move file
 np                                 -- Network Performance
 ns                                 -- Network Performance Server
 ping                               -- Ping
 pktLog                             -- Packet Log
 radar!                             -- Simulate radar detection on current channel
 reboot                             -- Reboot Access Point
 rm                                 -- Remove file
 run                                -- Run command file
 task priority                      -- Set task priority
 task show                          -- Set task info
 task stack                         -- Set task stack info
 task resume                        -- resume task
 task suspend                       -- suspend task
 tftp                               -- Software update via TFTP
 quit                               -- Logoff
 set 11gonly disable                -- Disable 11g only allowed
 set 11gonly enable                 -- Enable 11g only allowed
 set 11goptimize                    -- Set 11g Optimization Level
 set 11goverlapbss disable          -- Disable Overlapping BSS protection
 set 11goverlapbss enable           -- Enable Overlapping BSS protection
 set abolt                          -- 
 set acl allow                      -- Add MAC address to the ACL
 set acl enable                     -- Select Restricted Access
 set acl deny                       -- Add MAC address to the disabled ACL
 set acl disable                    -- Select Unrestrict Access
 set acl keymap                     -- Add Encryption key mapping for MAC address
 set acl strict                     -- Select Restricted (w/ACL match) Access
 set aging                          -- Set Aging Interval
 set antenna best                   -- Enable antenna diversity
 set antenna 1                      -- Select antenna 1
 set antenna 2                      -- Select antenna 2
 set authentication open-system     -- Select Open-System Authentication Type
 set authentication shared-key      -- Select Shared-Key Authentication Type
 set authentication auto            -- Select auto Authentication Type
 set authentication WPA             -- Select Authentication WPA Type
 set authentication WPA-PSK         -- Select Authentication WPA-PSK Type
 set authentication WPA2            -- Select WPA2 for Authentication Type
 set authentication WPA2-PSK        -- Select WPA2-PSK for Authentication Type
 set authentication WPA-AUTO        -- Allow WPAv1 or WPAv2 for Authentication Type
 set authentication WPA-AUTO-PSK    -- Allow WPAv1-PSK or WPAv2-PSK for Authentication Type
 set autoProvision disable          -- Disable Auto-Provisioning by AP
 set autoProvision enable           -- Enable Auto-Provisioning by AP
 set autochannelselect disable      -- Disable Automatic Channel Selection
 set autochannelselect enable       -- Enable Automatic Channel Selection
 set basic11b disable               -- Disable only basic 11b rates - use all rates
 set basic11b enable                -- Enable only basic 11b rates (1, 2)
 set basic11g 11                    -- Basic Rates (1, 2)
 set basic11g 11b                   -- Basic Rates (1, 2, 5.5, 11)
 set basic11g 11g                   -- Basic Rates (1, 2, 5.5, 11, 6, 12, 24)
 set basic11g ofdm                  -- Basic Rates (6, 12, 24)
 set beaconinterval                 -- Modify Beacon Interval
 set burstSeqThreshold              -- Set Max Number of frames in a Burst
 set burstTime                      -- Set Burst Time
 set cachePerf ic                   -- i-cache performance counters
 set cachePerf dc                   -- d-cache performance counters
 set cachePerf cm                   -- i and d-cache miss  counters
 set cachePerf ch                   -- i and d-cache hit   counters
 set calibration                    -- Set Calibration Period
 set cckTrigHigh                    -- Set Higher Trigger Threshold for CCK Phy Errors For ANI Control
 set cckTrigLow                     -- Set Lower Trigger Threshold for CCK Phy Errors For ANI Control
 set cckWeakSigThr                  -- Set ANI Parameter for CCK Weak Signal Detection Threshold
 set channel                        -- Set Radio Channel
 set cipher wep                     -- Select wep
 set cipher aes                     -- Select aes
 set cipher tkip                    -- Select tkip
 set cipher auto                    -- Select cipher through negotiation
 set compproc                       -- Set Compression Scheme
 set compwinsize                    -- Set Compression Window Size
 set countrycode                    -- Set Country Code
 set ctsmode                        -- Set CTS Mode
 set ctsrate                        -- Set CTS Rate
 set ctstype                        -- Set CTS Type
 set domainsuffix                   -- Set Domain Name Server Suffix
 set dtim                           -- Set Data Beacon Rate (DTIM)
 set dhcp disable                   -- Disable DHCP
 set dhcp enable                    -- Enable DHCP
 set enableANI                      -- Turn Adaptive Noise Immunity Control On/Off
 set encryption disable             -- Disable Encryption
 set encryption enable              -- Enable Encryption
 set extendedchanmode disable       -- Disable Extended Channel Mode
 set extendedchanmode enable        -- Enable Extended Channel Mode
 set factorydefault                 -- Restore to Default Factory Settings
 set firStepLvl                     -- Set ANI Parameter for FirStepLevel
 set fragmentthreshold              -- Set Fragment Threshold
 set frequency                      -- Set Radio Frequency (MHz)
 set gateway                        -- Set Gateway IP Address
 set gbeaconrate                    -- Set 11g Beacon Rate
 set groupkeyupdate                 -- Set Group Key Update Interval (in Seconds)
 set gdraft5 disable                -- Disable 11g Draft 5.0 compatibility
 set gdraft5 enable                 -- Enable 11g Draft 5.0 compatibility
 set hostipaddr                     -- Set Host IP address
 set ipaddr                         -- Set IP Address
 set ipmask                         -- Set IP Subnet Mask
 set jsw enable                     -- Enable  Jumpstart
 set jsw disable                    -- Disable  Jumpstart
 set jsp2Passwd                     -- Set JS-P2 password
 set key default                    -- Set Default Encryption Key
 set key 40                         -- Set 40-bit Encryption Key
 set key 104                        -- Set 104-bit Encryption Key
 set key 128                        -- Set 128-bit Encryption Key
 set keyentrymethod hexadecimal     -- Key contains (0 - 9, A - F)
 set keyentrymethod asciitext       -- Key contains keyboard characters
 set keysource flash                -- All keys will be read from flash (no key derivation)
 set keysource server               -- All keys will be derived from authentication server
 set keysource mixed                -- Keys read from flash or derived from authentication server
 set login                          -- Modify Login User Name
 set minimumrate 0.25               -- Select 0.25 Mbps
 set minimumrate 0.5                -- Select 0.5 Mbps
 set minimumrate 1                  -- Select 1 Mbps
 set minimumrate 2                  -- Select 2 Mbps
 set minimumrate 3                  -- Select 3 Mbps
 set minimumrate 6                  -- Select 6 Mbps
 set minimumrate 9                  -- Select 9 Mbps
 set minimumrate 12                 -- Select 12 Mbps
 set minimumrate 18                 -- Select 18 Mbps
 set minimumrate 24                 -- Select 24 Mbps
 set minimumrate 36                 -- Select 36 Mbps
 set minimumrate 48                 -- Select 48 Mbps
 set minimumrate 54                 -- Select 54 Mbps
 set minimumrate 12                 -- Select 12 Mbps
 set minimumrate 18                 -- Select 18 Mbps
 set minimumrate 24                 -- Select 24 Mbps
 set minimumrate 36                 -- Select 36 Mbps
 set minimumrate 48                 -- Select 48 Mbps
 set minimumrate 72                 -- Select 72 Mbps
 set minimumrate 96                 -- Select 96 Mbps
 set minimumrate 108                -- Select 108 Mbps
 set minimumrate 1                  -- Select 1 Mbps
 set minimumrate 2                  -- Select 2 Mbps
 set minimumrate 5.5                -- Select 5.5 Mbps
 set minimumrate 11                 -- Select 11 Mbps
 set minimumrate 0.25               -- Select 0.25 Mbps
 set minimumrate 0.5                -- Select 0.5 Mbps
 set minimumrate 1                  -- Select 1 Mbps
 set minimumrate 2                  -- Select 2 Mbps
 set minimumrate 1x                 -- Select XR 1 Mbps
 set minimumrate 2x                 -- Select XR 2 Mbps
 set minimumrate 3                  -- Select 3 Mbps
 set minimumrate 5.5                -- Select 5.5 Mbps
 set minimumrate 11                 -- Select 11 Mbps
 set minimumrate 6                  -- Select 6 Mbps
 set minimumrate 9                  -- Select 9 Mbps
 set minimumrate 12                 -- Select 12 Mbps
 set minimumrate 18                 -- Select 18 Mbps
 set minimumrate 24                 -- Select 24 Mbps
 set minimumrate 36                 -- Select 36 Mbps
 set minimumrate 48                 -- Select 48 Mbps
 set minimumrate 54                 -- Select 54 Mbps
 set minimumrate 12                 -- Select 12 Mbps
 set minimumrate 18                 -- Select 18 Mbps
 set minimumrate 24                 -- Select 24 Mbps
 set minimumrate 36                 -- Select 36 Mbps
 set minimumrate 48                 -- Select 48 Mbps
 set minimumrate 72                 -- Select 72 Mbps
 set minimumrate 96                 -- Select 96 Mbps
 set minimumrate 108                -- Select 108 Mbps
 set nameaddress                    -- Set Name Server IP address
 set noiseImmunityLvl               -- Set ANI Parameter for Noise Immunity Level
 set ofdmTrigHigh                   -- Set Higher Trigger Threshold for OFDM Phy Errors for ANI Control
 set ofdmTrigLow                    -- Set Lower Trigger Threshold for OFDM Phy Errors for ANI Control
 set ofdmWeakSigDet                 -- Set ANI Parameter for OFDM Weak Signal Detection
 set overRidetxpower                -- Set Tx power override
 set operationMode ap               -- Operating as Access Point
 set operationMode sta              -- Operating as Wireless Client
 set operationMode wbr              -- Operating as Wireless Bridge
 set operationMode repeater         -- Operating as Wireless Repeater
 set password                       -- Modify Password
 set passphrase                     -- Modify Passphrase
 set pktLogEnable                   -- Enable Packet Logging
 set power full                     -- Set maximum (normal) transmit power
 set power half                     -- Set fractional (1/2) transmit power
 set power quarter                  -- Set fractional (1/4) transmit power
 set power eighth                   -- Set fractional (1/8) transmit power
 set power min                      -- Set minimum transmit power
 set quietAckCtsAllow               -- Allow Ack/Cts frames during quiet period
 set quietDuration                  -- Duration of quiet period
 set quietOffset                    -- Offset of quiet period into the beacon period
 set radiusname                     -- Set RADIUS name or IP address
 set radiusport                     -- Set RADIUS port number
 set radiussecret                   -- Set RADIUS shared secret
 set rate best                      -- Select best data rate
 set rate 6                         -- Select 6 Mbps
 set rate 9                         -- Select 9 Mbps
 set rate 12                        -- Select 12 Mbps
 set rate 18                        -- Select 18 Mbps
 set rate 24                        -- Select 24 Mbps
 set rate 36                        -- Select 36 Mbps
 set rate 48                        -- Select 48 Mbps
 set rate 54                        -- Select 54 Mbps
 set rate best                      -- Select best data rate
 set rate 12                        -- Select 12 Mbps
 set rate 18                        -- Select 18 Mbps
 set rate 24                        -- Select 24 Mbps
 set rate 36                        -- Select 36 Mbps
 set rate 48                        -- Select 48 Mbps
 set rate 72                        -- Select 72 Mbps
 set rate 96                        -- Select 96 Mbps
 set rate 108                       -- Select 108 Mbps
 set rate best                      -- Select best data rate
 set rate 1                         -- Select 1 Mbps
 set rate 2                         -- Select 2 Mbps
 set rate 5.5                       -- Select 5.5 Mbps
 set rate 11                        -- Select 11 Mbps
 set rate best                      -- Select best data rate
 set rate 1                         -- Select 1 Mbps
 set rate 2                         -- Select 2 Mbps
 set rate 5.5                       -- Select 5.5 Mbps
 set rate 11                        -- Select 11 Mbps
 set rate 6                         -- Select 6 Mbps
 set rate 9                         -- Select 9 Mbps
 set rate 12                        -- Select 12 Mbps
 set rate 18                        -- Select 18 Mbps
 set rate 24                        -- Select 24 Mbps
 set rate 36                        -- Select 36 Mbps
 set rate 48                        -- Select 48 Mbps
 set rate 54                        -- Select 54 Mbps
 set rate best                      -- Select best data rate
 set rate 12                        -- Select 12 Mbps
 set rate 18                        -- Select 18 Mbps
 set rate 24                        -- Select 24 Mbps
 set rate 36                        -- Select 36 Mbps
 set rate 48                        -- Select 48 Mbps
 set rate 72                        -- Select 72 Mbps
 set rate 96                        -- Select 96 Mbps
 set rate 108                       -- Select 108 Mbps
 set reg                            -- Set Register Value
 set regulatorydomain               -- Set Regulatory Domain
 set remoteAP                       -- Set Remote AP's Mac Address
 set hwtxretries                    -- Set HW Transmit Retry Limit
 set swtxretries                    -- Set SW Transmit Retry Limit
 set rtsthreshold                   -- Set RTS/CTS Threshold
 set shortpreamble disable          -- Disable Short Preamble (use only long)
 set shortpreamble enable           -- Enable Short and Long Preamble
 set shortslottime disable          -- Disable Short Slot Time (use only long)
 set shortslottime enable           -- Enable Short Slot Time
 set sntpserver                     -- Set SNTP/NTP Server IP Address
 set softwareretry enable           -- Enable Software Retry
 set softwareretry disable          -- Disable Software Retry
 set spurImmunityLvl                -- Set ANI Parameter for Spur Immunity Level
 set ssid                           -- Set Service Set ID
 set ssidsuppress enable            -- Enable SSID suppress mode
 set ssidsuppress disable           -- Disable SSID suppress mode
 set SuperG enable                  -- Enable SuperG Features
 set SuperG disable                 -- Disable SuperG Features
 set systemname                     -- Set Access Point System Name
 set telnet disable                 -- Disable Telnet access
 set telnet enable                  -- Enable Telnet access
 set timeout                        -- Set Telnet Timeout
 set tzone                          -- Set Time Zone Setting
 set updateparam                    -- Set Vendor Default Firmware Update Params
 set vlan disable                   -- Disable VLAN
 set vlan enable                    -- Enable VLAN
 set watchdog disable               -- Disable Watchdog
 set watchdog enable                -- Enable Watchdog
 set wds disable                    -- Disable WDS support
 set wds enable                     -- Enable WDS support
 set webUI disable                  -- Disable Web UI
 set webUI enable                   -- Enable Web UI
 set wep disable                    -- Disable Encryption
 set wep enable                     -- Enable Encryption
 set wlanstate disable              -- Disable wlan
 set wlanstate enable               -- Enable wlan
 set wirelessmode 11a               -- 802.11a
 set wirelessmode 11b               -- 802.11b
 set wirelessmode 11g               -- 802.11g
 set wirelessmode 108g static       -- 802.11g Static Turbo
 set wirelessmode 108g dynamic      -- 802.11g Dynamic Turbo
 set wirelessmode turbo static      -- 802.11a Static Turbo
 set wirelessmode turbo dynamic     -- 802.11a Dynamic Turbo
 set wmm disable                    -- Disable WMM
 set wmm enable                     -- Enable WMM
 set wmmParamBss ac                 -- Set EDCA values for all access classes
 set wmmParam ac                    -- Set EDCA values for all access classes
 set wmmParam queue                 -- Set EDCA values for all HW queues
 spy report                         -- Print spy report
 spy show                           -- Print debug info
 spy start                          -- Start spy
 spy stop                           -- Stop spy
 start wlan                         -- Start the current wlan
 stop wlan                          -- Stop the current wlan
 support                            -- Print support information
 timeofday                          -- Display Current Time of Day
 v54 alg                            -- Set/show the antenna algorithm
 v54 ant                            -- Video54 Antenna Config
 v54 antreset                       -- Reset V54 TxCtrl State
 v54 rtt                            -- Real-time Telemetry output
 v54 fchan                          -- Fast Channel Change
 v54 emon rx disable                -- Disable Rx stats gathering
 v54 emon rx enable                 -- Enable  Rx stats gathering
 v54 emon tx disable                -- Disable Tx stats gathering
 v54 emon tx enable                 -- Enable  Tx stats gathering
 v54 emon output disable            -- Disable emon periodic output
 v54 emon output enable             -- Enable  emon periodic output
 v54 emon dump second               -- Dump per-second stats history
 v54 emon dump minute               -- Dump per-minute stats history
 v54 emon dump hour                 -- Dump per-hour   stats history
 v54 learn                          -- Send V54 learning packets
 v54 queue                          -- Video54 Queuing Debug Info
 v54 reset                          -- Reset V54 TxCtrl State
 v54 staQueue clear                 -- Reset PSQ statistics counters
 v54 staQueue disable               -- Disable Per-Station-Queue scheduling
 v54 staQueue enable                -- Enable Per-Station-Queue scheduling
 v54 staQueue hires disable         -- Disable using Hi-Res Clock
 v54 staQueue hires enable          -- Enable using Hi-Res Clock
 v54 staQueue priorityAdjust        -- PSQ priority-adjust factor
 v54 staQueue queueLimit            -- PSQ per-station max queue size
 v54 staQueue show                  -- Display PSQ statistics
 v54 staticant                      -- Configure a static antenna
 v54 staticant                      -- Configure a static antenna
 version                            -- Software version
 video classifier actions tos disable -- Disable TOS marking
 video classifier actions tos enable -- Enable TOS marking
 video classifier actions tos video -- Set Video TOS value
 video classifier actions tos voIP  -- Set VoIP TOS value
 video classifier both dbmcast disable -- Disable Directed Bcast/Mcast Feature
 video classifier both dbmcast enable -- Enable Directed Bcast/Mcast Feature
 video classifier both disable      -- Disable Classification on Interface
 video classifier both enable       -- Enable Classification on Interface
 video classifier both igmp disable -- Disable IGMP Snooping
 video classifier both igmp enable  -- Enable IGMP Snooping
 video classifier both port add tcp dest tos video -- Mark TOS with video value
 video classifier both port add tcp dest tos voice -- Mark TOS with voice value
 video classifier both port add tcp dest drop -- Drop packet
 video classifier both port add tcp dest pcap -- Capture packet
 video classifier both port add tcp dst tos video -- Mark TOS with video value
 video classifier both port add tcp dst tos voice -- Mark TOS with voice value
 video classifier both port add tcp dst drop -- Drop packet
 video classifier both port add tcp dst pcap -- Capture packet
 video classifier both port add tcp src tos video -- Mark TOS with video value
 video classifier both port add tcp src tos voice -- Mark TOS with voice value
 video classifier both port add tcp src drop -- Drop packet
 video classifier both port add tcp src pcap -- Capture packet
 video classifier both port add udp dest tos video -- Mark TOS with video value
 video classifier both port add udp dest tos voice -- Mark TOS with voice value
 video classifier both port add udp dest drop -- Drop packet
 video classifier both port add udp dest pcap -- Capture packet
 video classifier both port add udp dst tos video -- Mark TOS with video value
 video classifier both port add udp dst tos voice -- Mark TOS with voice value
 video classifier both port add udp dst drop -- Drop packet
 video classifier both port add udp dst pcap -- Capture packet
 video classifier both port add udp src tos video -- Mark TOS with video value
 video classifier both port add udp src tos voice -- Mark TOS with voice value
 video classifier both port add udp src drop -- Drop packet
 video classifier both port add udp src pcap -- Capture packet
 video classifier both port delete tcp dest tos video -- Mark TOS with video value
 video classifier both port delete tcp dest tos voice -- Mark TOS with voice value
 video classifier both port delete tcp dest drop -- Drop packet
 video classifier both port delete tcp dest pcap -- Capture packet
 video classifier both port delete tcp dst tos video -- Mark TOS with video value
 video classifier both port delete tcp dst tos voice -- Mark TOS with voice value
 video classifier both port delete tcp dst drop -- Drop packet
 video classifier both port delete tcp dst pcap -- Capture packet
 video classifier both port delete tcp src tos video -- Mark TOS with video value
 video classifier both port delete tcp src tos voice -- Mark TOS with voice value
 video classifier both port delete tcp src drop -- Drop packet
 video classifier both port delete tcp src pcap -- Capture packet
 video classifier both port delete udp dest tos video -- Mark TOS with video value
 video classifier both port delete udp dest tos voice -- Mark TOS with voice value
 video classifier both port delete udp dest drop -- Drop packet
 video classifier both port delete udp dest pcap -- Capture packet
 video classifier both port delete udp dst tos video -- Mark TOS with video value
 video classifier both port delete udp dst tos voice -- Mark TOS with voice value
 video classifier both port delete udp dst drop -- Drop packet
 video classifier both port delete udp dst pcap -- Capture packet
 video classifier both port delete udp src tos video -- Mark TOS with video value
 video classifier both port delete udp src tos voice -- Mark TOS with voice value
 video classifier both port delete udp src drop -- Drop packet
 video classifier both port delete udp src pcap -- Capture packet
 video classifier both port disable -- Disable port classification Mode
 video classifier both port enable  -- Enable port classification Mode
 video classifier both port show    -- Show current L4 port filters
 video classifier both show         -- Show Classification Info
 video classifier both nonzero disable -- Disable Non-zero TOS marking
 video classifier both nonzero enable -- Enable Non-zero TOS marking
 video classifier both unkMcast disable -- Disable Unknown Mcast Drop
 video classifier both unkMcast enable -- Enable Unknown Mcast Drop
 video classifier both upnp disable -- Disable UPnP Processing
 video classifier both upnp enable  -- Enable UPnP Processing
 video classifier ethernet dbmcast disable -- Disable Directed Bcast/Mcast Feature
 video classifier ethernet dbmcast enable -- Enable Directed Bcast/Mcast Feature
 video classifier ethernet disable  -- Disable Classification on Interface
 video classifier ethernet enable   -- Enable Classification on Interface
 video classifier ethernet igmp disable -- Disable IGMP Snooping
 video classifier ethernet igmp enable -- Enable IGMP Snooping
 video classifier ethernet port add tcp dest tos video -- Mark TOS with video value
 video classifier ethernet port add tcp dest tos voice -- Mark TOS with voice value
 video classifier ethernet port add tcp dest drop -- Drop packet
 video classifier ethernet port add tcp dest pcap -- Capture packet
 video classifier ethernet port add tcp dst tos video -- Mark TOS with video value
 video classifier ethernet port add tcp dst tos voice -- Mark TOS with voice value
 video classifier ethernet port add tcp dst drop -- Drop packet
 video classifier ethernet port add tcp dst pcap -- Capture packet
 video classifier ethernet port add tcp src tos video -- Mark TOS with video value
 video classifier ethernet port add tcp src tos voice -- Mark TOS with voice value
 video classifier ethernet port add tcp src drop -- Drop packet
 video classifier ethernet port add tcp src pcap -- Capture packet
 video classifier ethernet port add udp dest tos video -- Mark TOS with video value
 video classifier ethernet port add udp dest tos voice -- Mark TOS with voice value
 video classifier ethernet port add udp dest drop -- Drop packet
 video classifier ethernet port add udp dest pcap -- Capture packet
 video classifier ethernet port add udp dst tos video -- Mark TOS with video value
 video classifier ethernet port add udp dst tos voice -- Mark TOS with voice value
 video classifier ethernet port add udp dst drop -- Drop packet
 video classifier ethernet port add udp dst pcap -- Capture packet
 video classifier ethernet port add udp src tos video -- Mark TOS with video value
 video classifier ethernet port add udp src tos voice -- Mark TOS with voice value
 video classifier ethernet port add udp src drop -- Drop packet
 video classifier ethernet port add udp src pcap -- Capture packet
 video classifier ethernet port delete tcp dest tos video -- Mark TOS with video value
 video classifier ethernet port delete tcp dest tos voice -- Mark TOS with voice value
 video classifier ethernet port delete tcp dest drop -- Drop packet
 video classifier ethernet port delete tcp dest pcap -- Capture packet
 video classifier ethernet port delete tcp dst tos video -- Mark TOS with video value
 video classifier ethernet port delete tcp dst tos voice -- Mark TOS with voice value
 video classifier ethernet port delete tcp dst drop -- Drop packet
 video classifier ethernet port delete tcp dst pcap -- Capture packet
 video classifier ethernet port delete tcp src tos video -- Mark TOS with video value
 video classifier ethernet port delete tcp src tos voice -- Mark TOS with voice value
 video classifier ethernet port delete tcp src drop -- Drop packet
 video classifier ethernet port delete tcp src pcap -- Capture packet
 video classifier ethernet port delete udp dest tos video -- Mark TOS with video value
 video classifier ethernet port delete udp dest tos voice -- Mark TOS with voice value
 video classifier ethernet port delete udp dest drop -- Drop packet
 video classifier ethernet port delete udp dest pcap -- Capture packet
 video classifier ethernet port delete udp dst tos video -- Mark TOS with video value
 video classifier ethernet port delete udp dst tos voice -- Mark TOS with voice value
 video classifier ethernet port delete udp dst drop -- Drop packet
 video classifier ethernet port delete udp dst pcap -- Capture packet
 video classifier ethernet port delete udp src tos video -- Mark TOS with video value
 video classifier ethernet port delete udp src tos voice -- Mark TOS with voice value
 video classifier ethernet port delete udp src drop -- Drop packet
 video classifier ethernet port delete udp src pcap -- Capture packet
 video classifier ethernet port disable -- Disable port classification Mode
 video classifier ethernet port enable -- Enable port classification Mode
 video classifier ethernet port show -- Show current L4 port filters
 video classifier ethernet show     -- Show Classification Info
 video classifier ethernet nonzero disable -- Disable Non-zero TOS marking
 video classifier ethernet nonzero enable -- Enable Non-zero TOS marking
 video classifier ethernet unkMcast disable -- Disable Unknown Mcast Drop
 video classifier ethernet unkMcast enable -- Enable Unknown Mcast Drop
 video classifier ethernet upnp disable -- Disable UPnP Processing
 video classifier ethernet upnp enable -- Enable UPnP Processing
 video classifier wireless dbmcast disable -- Disable Directed Bcast/Mcast Feature
 video classifier wireless dbmcast enable -- Enable Directed Bcast/Mcast Feature
 video classifier wireless disable  -- Disable Classification on Interface
 video classifier wireless enable   -- Enable Classification on Interface
 video classifier wireless igmp disable -- Disable IGMP Snooping
 video classifier wireless igmp enable -- Enable IGMP Snooping
 video classifier wireless port add tcp dest tos video -- Mark TOS with video value
 video classifier wireless port add tcp dest tos voice -- Mark TOS with voice value
 video classifier wireless port add tcp dest drop -- Drop packet
 video classifier wireless port add tcp dest pcap -- Capture packet
 video classifier wireless port add tcp dst tos video -- Mark TOS with video value
 video classifier wireless port add tcp dst tos voice -- Mark TOS with voice value
 video classifier wireless port add tcp dst drop -- Drop packet
 video classifier wireless port add tcp dst pcap -- Capture packet
 video classifier wireless port add tcp src tos video -- Mark TOS with video value
 video classifier wireless port add tcp src tos voice -- Mark TOS with voice value
 video classifier wireless port add tcp src drop -- Drop packet
 video classifier wireless port add tcp src pcap -- Capture packet
 video classifier wireless port add udp dest tos video -- Mark TOS with video value
 video classifier wireless port add udp dest tos voice -- Mark TOS with voice value
 video classifier wireless port add udp dest drop -- Drop packet
 video classifier wireless port add udp dest pcap -- Capture packet
 video classifier wireless port add udp dst tos video -- Mark TOS with video value
 video classifier wireless port add udp dst tos voice -- Mark TOS with voice value
 video classifier wireless port add udp dst drop -- Drop packet
 video classifier wireless port add udp dst pcap -- Capture packet
 video classifier wireless port add udp src tos video -- Mark TOS with video value
 video classifier wireless port add udp src tos voice -- Mark TOS with voice value
 video classifier wireless port add udp src drop -- Drop packet
 video classifier wireless port add udp src pcap -- Capture packet
 video classifier wireless port delete tcp dest tos video -- Mark TOS with video value
 video classifier wireless port delete tcp dest tos voice -- Mark TOS with voice value
 video classifier wireless port delete tcp dest drop -- Drop packet
 video classifier wireless port delete tcp dest pcap -- Capture packet
 video classifier wireless port delete tcp dst tos video -- Mark TOS with video value
 video classifier wireless port delete tcp dst tos voice -- Mark TOS with voice value
 video classifier wireless port delete tcp dst drop -- Drop packet
 video classifier wireless port delete tcp dst pcap -- Capture packet
 video classifier wireless port delete tcp src tos video -- Mark TOS with video value
 video classifier wireless port delete tcp src tos voice -- Mark TOS with voice value
 video classifier wireless port delete tcp src drop -- Drop packet
 video classifier wireless port delete tcp src pcap -- Capture packet
 video classifier wireless port delete udp dest tos video -- Mark TOS with video value
 video classifier wireless port delete udp dest tos voice -- Mark TOS with voice value
 video classifier wireless port delete udp dest drop -- Drop packet
 video classifier wireless port delete udp dest pcap -- Capture packet
 video classifier wireless port delete udp dst tos video -- Mark TOS with video value
 video classifier wireless port delete udp dst tos voice -- Mark TOS with voice value
 video classifier wireless port delete udp dst drop -- Drop packet
 video classifier wireless port delete udp dst pcap -- Capture packet
 video classifier wireless port delete udp src tos video -- Mark TOS with video value
 video classifier wireless port delete udp src tos voice -- Mark TOS with voice value
 video classifier wireless port delete udp src drop -- Drop packet
 video classifier wireless port delete udp src pcap -- Capture packet
 video classifier wireless port disable -- Disable port classification Mode
 video classifier wireless port enable -- Enable port classification Mode
 video classifier wireless port show -- Show current L4 port filters
 video classifier wireless show     -- Show Classification Info
 video classifier wireless nonzero disable -- Disable Non-zero TOS marking
 video classifier wireless nonzero enable -- Enable Non-zero TOS marking
 video classifier wireless unkMcast disable -- Disable Unknown Mcast Drop
 video classifier wireless unkMcast enable -- Enable Unknown Mcast Drop
 video classifier wireless upnp disable -- Disable UPnP Processing
 video classifier wireless upnp enable -- Enable UPnP Processing
 video qos disable                  -- Disable QOS Features
 video qos enable                   -- Enable QOS Features
 video qos mgtAcl disable           -- Disable MgtACL Feature
 video qos mgtAcl enable            -- Enable MgtACL Feature
 video qos show                     -- Display QOS state
 video qos txFail                   -- Set Tx Failure Threshold
 video pcap start                   -- Start capture
 video pcap continue                -- continue capture
 video pcap stop                    -- Stop capture
 video pcap save                    -- Save capture
 video pcap set                     -- Set options
 video pcap show                    -- Display capture status
wlan0 -> boot etherner
Invalid parameter: etherner
Type "help" for a list of valid commands.
wlan0 -> boot ethernet
BOOT PARAM           : bootline
IP Addrress          : 192.168.0.1:ffffff00
Host                 : 
Gateway              : 
Startup script       : 
other                : AP
boot device          : ae
unit number          : 1 
processor number     : 0 
file name            : /fl/apv54
inet on ethernet (e) : 192.168.0.1:ffffff00
flags (f)            : 0x80 
other (o)            : AP
wlan0 -> hel
BOOT PARAM           : bootline
IP Addrress          : 192.168.0.1:ffffff00
Host                 : 
Gateway              : 
Startup script       : 
other                : AP
List of Access Point CLI commands:
 ?                                  -- Display CLI Command List
 arp add                            -- create or modify ARP table entry
 arp delete                         -- remove ARP table entry
 arp flush                          -- flush all entries in the ARP table
 arp show                           -- Display firmware information
 board change                       -- Change Board Data
 board dump                         -- Dump Board Data
 add remoteWbr                      -- Add a remote Wireless Bridge
 admin                              -- Temporary factory admin
 boot flash                         -- Boot from flash
 boot ethernet                      -- Boot from network
 boot dump                          -- dump boot line data
 cat                                -- list file
 cp                                 -- Copy file
 config wlan                        -- config wlanX
 connect bss                        -- connect to bssX
 del acl                            -- Delete Access Control List
 del key                            -- Delete Encryption key
 del remoteWbr                      -- Delete a remote Wireless Bridge
 del seed                           -- Delete Random Seed
 dis                                -- Dis-associate an End Station
 eeprom                             -- dump eeprom data
 find bss                           -- Find BSS
 find channel                       -- Find Available Channel
 find all                           -- Find All BSS
 format                             -- Format flash filesytem
 bootrom                            -- Update boot rom image
 ftp                                -- Software update via FTP
 get 11gonly                        -- Display 11g Only Allowed
 get 11goptimize                    -- Display 11g Optimization Level
 get 11goverlapbss                  -- Display Overlapping BSS Protection
 get abolt                          -- 
 get acl                            -- Display Access Control List
 get aging                          -- Display Aging Interval
 get antenna                        -- Display Antenna Diversity
 get arp                            -- Display arp Table
 get if                             -- Display attached network interfaces
 get routes                         -- Display routing table 
 get association                    -- Display Association Table
 get authentication                 -- Display Authentication Type
 get autoProvision                  -- Display Auto-Provision Mode
 get autochannelselect              -- Display Auto Channel Select
 get basic11b                       -- Display Basic 11b Rates
 get basic11g                       -- Display Basic 11g Rates
 get beaconinterval                 -- Display Beacon Interval
 get bridgeTable                    -- Display internal SW bridge table
 get burstSeqThreshold              -- Display Max Number of frames in a Burst
 get burstTime                      -- Display Burst Time
 get cacheperf                      -- Display the cache performance counters
 get calibration                    -- Display Noise And Offset Calibration Mode
 get cckTrigHigh                    -- Display Higher Trigger Threshold for CCK Phy Errors for ANI Control
 get cckTrigLow                     -- Display Lower Trigger Threshold for CCK Phy Errors for ANI Control
 get cckWeakSigThr                  -- Display ANI Parameter for CCK Weak Signal Detection Threshold
 get channel                        -- Display Radio Channel
 get cipher                         -- Display Encryption cipher
 get compproc                       -- Display Compression scheme
 get compwinsize                    -- Display Compression Window Size
 get config                         -- Display Current AP Configuration
 get countrycode                    -- Display Country Code
 get ctsmode                        -- Display CTS mode
 get ctsrate                        -- Display CTS rate
 get ctstype                        -- Display CTS type
 get domainsuffix                   -- Display Domain Name Server suffix
 get dtim                           -- Display Data Beacon Rate (DTIM)
 get dhcp                           -- Display DHCP Client Mode
 get enableANI                      -- Display Adaptive Noise Immu^Cnity Control On/Off
 get encryption                     -- Display Encryption Mode
 get eth                            -- Display Ethernet Statistics
 get extendedchanmode               -- Display Ext^ended Channel Mode
 get firStepLvl                     -- Display ANI Parameter for FirStepLevel
 get fragmentthreshold              -- Display Fragment Thresho^ld
 get frequency                      -- Display Radio Frequency (MHz)
 get gateway                        -- Display G
ateway IP Address
 get gbeaconrate                    -- Display 11g Beacon Rate
 get gdraft5                        -- Display 11g Draft 5.0 compatibility
 get groupkeyupdate     
            -- Display Group Key Update Interval (in Seconds)
 get hardware                       -- Display Hardware Revisions
 get hostipaddr                     -- Display Host IP Address
 get ipaddr                         -- Display IP Address
 get ipmask                         -- Display IP Subnet Mask
 get jsw                     
       -- Display Jumpstart Mode
 get jsP2PassPhrase                 -- Display JS-P2 passphrase
 get key               
             -- Display Encryption Key
 get keyentrymethod                 -- Display Encyrption Key Entry Method
 get k
eysource                      -- Display Source Of Encryption Keys
 get ledStatus                      -- Display current LED status
 get login                          -- Display Login User Name
 get minimumrate                    -- Display Minimum Rate
 get nameaddr                       -- Display IP address of name server
 get nf                             -- Display Noise Floor
 get noiseImmunityLvl               -- Display ANI Parameter for Noise Immunity Level
 get ofdmTrigHigh                   -- Display Higher Trigger Threshold for OFDM Phy Errors for ANI Control
 get ofdmTrigLow                    -- Display Lower Trigger Threshold for OFDM Phy Errors for ANI Control
 get ofdmWeakSigDet                 -- Display ANI Parameter for OFDM Weak Signal Detection
 get overRidetxpower                -- Display Tx power override
 get operationMode                  -- Display Operation Mode
 get passphrase                     -- Display Passphrase
 get passphrasekey                  -- Display Passphrase Key
 get perfstats                      -- Dump system performance stats
 get pnetmon                        -- NetTask profile information
 get pktLogEnable                   -- Display Packet Logging Mode
 get power                          -- Display Transmit Power Setting
 get quietAckCtsAllow               -- Display if Ack/Cts frames are allowed during quiet period
 get quietDuration                  -- Display Duration of quiet period
 get quietOffset                    -- Display Offset of quiet period into the beacon period
 get radiusname                     -- Display RADIUS server name or IP address
 get radiusport                     -- Display RADIUS port number
 get rate                           -- Display Data Rate
 get reg                            -- Display the register contents at the given offset
 get remoteAp                       -- Display Remote Ap's Mac Address
 get reset                          -- Display # of resets
 get remoteWbr                      -- Display configured Remote Wireless bridges
 get hwtxretries                    -- Display HW Transmit Retry Limit
 get swtxretries                    -- Display SW Transmit Retry Limit
 get rtsthreshold                   -- Display RTS/CTS Threshold
 get seed                           -- Display Random Seed
 get shortpreamble                  -- Display Short Preamble Usage
 get shortslottime                  -- Display Short Slot Time Usage
 get sib                            -- Display Station Information
 get sntpserver                     -- Display SNTP/NTP Server IP Address
 get softwareretry                  -- Display Software Retry
 get spurImmunityLvl                -- Display ANI Parameter for Spur Immunity Level
 get ssid                           -- Display Service Set ID
 get ssidsuppress                   -- Display SSID Suppress Mode
 get station                        -- Display Station Status
 get SuperG                         -- Display SuperG Feature Status
 get systemname                     -- Display Access Point System Name
 get telnet                         -- Display Telnet Mode
 get timeout                        -- Display Telnet Timeout
 get times                          -- Display startup times
 get tzone                          -- Display Time Zone Setting
 get updateparam                    -- Display Vendor Default Firmware Update Params
 get uptime                         -- Display UpTime
 get vlan                           -- Display VLAN Mode
 get watchdog                       -- Display Watchdog Mode
 get wds                            -- Display WDS Mode
 get webUI                          -- Display WebUI Mode
 get wep                            -- Display Encryption Mode
 get wirelessmode                   -- Display Wireless LAN Mode
 get wmm                            -- Display WMM Mode
 get wmmParamBss                    -- Display WMM parameters used by STA in this BSS
 get wmmParam                       -- Display WMM parameters used by this AP
 get wlanstate                      -- Display wlan state
 help                               -- Display CLI Command List
 Lebradeb                           -- Disable reboot during radar detection
 ls                                 -- list directory
 logoff                             -- Logoff
 mem                                -- system memory statistics
 mv                                 -- Move file
 np                                 -- Network Performance
 ns                                 -- Network Performance Server
 ping                               -- Ping
 pktLog                             -- Packet Log
 radar!                             -- Simulate radar detection on current channel
 reboot                             -- Reboot Access Point
 rm                                 -- Remove file
 run                                -- Run command file
 task priority                      -- Set task priority
 task show                          -- Set task info
 task stack                         -- Set task stack info
 task resume                        -- resume task
 task suspend                       -- suspend task
 tftp                               -- Software update via TFTP
 quit                               -- Logoff
 set 11gonly                        -- Set 11g Only Allowed
 set 11goptimize                    -- Set 11g Optimization Level
 set 11goverlapbss                  -- Set Overlapping BSS Protection
 set abolt                          -- 
 set acl                            -- Set Access Control List
 set aging                          -- Set Aging Interval
 set antenna                        -- Set Antenna
 set authentication                 -- Set Authentication Type
 set autoProvision                  -- Set Auto-Provision Mode
 set autochannelselect              -- Set Auto Channel Selection
 set basic11b                       -- Set Use of Basic 11b Rates
 set basic11g                       -- Set Use of Basic 11g Rates
 set beaconinterval                 -- Modify Beacon Interval
 set burstSeqThreshold              -- Set Max Number of frames in a Burst
 set burstTime                      -- Set Burst Time
 set cachePerf                      -- Begin cache performance monitoring
 set calibration                    -- Set Calibration Period
 set cckTrigHigh                    -- Set Higher Trigger Threshold for CCK Phy Errors For ANI Control
 set cckTrigLow                     -- Set Lower Trigger Threshold for CCK Phy Errors For ANI Control
 set cckWeakSigThr                  -- Set ANI Parameter for CCK Weak Signal Detection Threshold
 set channel                        -- Set Radio Channel
 set cipher                         -- Set Cipher
 set compproc                       -- Set Compression Scheme
 set compwinsize                    -- Set Compression Window Size
 set countrycode                    -- Set Country Code
 set ctsmode                        -- Set CTS Mode
 set ctsrate                        -- Set CTS Rate
 set ctstype                        -- Set CTS Type
 set domainsuffix                   -- Set Domain Name Server Suffix
 set dtim                           -- Set Data Beacon Rate (DTIM)
 set dhcp                           -- Set DHCP Mode
 set enableANI                      -- Turn Adaptive Noise Immunity Control On/Off
 set encryption                     -- Set Encryption Mode
 set extendedchanmode               -- Set Extended Channel Mode
 set factorydefault                 -- Restore to Default Factory Settings
 set firStepLvl                     -- Set ANI Parameter for FirStepLevel
 set fragmentthreshold              -- Set Fragment Threshold
 set frequency                      -- Set Radio Frequency (MHz)
 set gateway                        -- Set Gateway IP Address
 set gbeaconrate                    -- Set 11g Beacon Rate
 set groupkeyupdate                 -- Set Group Key Update Interval (in Seconds)
 set gdraft5                        -- Set 11g Draft 5.0 compatibility
 set hostipaddr                     -- Set Host IP address
 set ipaddr                         -- Set IP Address
 set ipmask                         -- Set IP Subnet Mask
 set jsw                            -- Set Jumpstart Mode
 set jsp2Passwd                     -- Set JS-P2 password
 set key                            -- Set Encryption Key
 set keyentrymethod                 -- Select Encryption Key Entry Method
 set keysource                      -- Select Source Of Encryption Keys
 set login                          -- Modify Login User Name
 set minimumrate                    -- Set Minimum Rate
 set minimumrate                    -- Set Minimum Rate
 set minimumrate                    -- Set Minimum Rate
 set minimumrate                    -- Set Minimum Rate
 set minimumrate                    -- Set Minimum Rate
 set nameaddress                    -- Set Name Server IP address
 set noiseImmunityLvl               -- Set ANI Parameter for Noise Immunity Level
 set ofdmTrigHigh                   -- Set Higher Trigger Threshold for OFDM Phy Errors for ANI Control
 set ofdmTrigLow                    -- Set Lower Trigger Threshold for OFDM Phy Errors for ANI Control
 set ofdmWeakSigDet                 -- Set ANI Parameter for OFDM Weak Signal Detection
 set overRidetxpower                -- Set Tx power override
 set operationMode                  -- Set operation Mode
 set password                       -- Modify Password
 set passphrase                     -- Modify Passphrase
 set pktLogEnable                   -- Enable Packet Logging
 set power                          -- Set Transmit Power
 set quietAckCtsAllow               -- Allow Ack/Cts frames during quiet period
 set quietDuration                  -- Duration of quiet period
 set quietOffset                    -- Offset of quiet period into the beacon period
 set radiusname                     -- Set RADIUS name or IP address
 set radiusport                     -- Set RADIUS port number
 set radiussecret                   -- Set RADIUS shared secret
 set rate                           -- Set Data Rate
 set rate                           -- Set Data Rate
 set rate                           -- Set Data Rate
 set rate                           -- Set Data Rate
 set rate                           -- Set Data Rate
 set reg                            -- Set Register Value
 set regulatorydomain               -- Set Regulatory Domain
 set remoteAP                       -- Set Remote AP's Mac Address
 set hwtxretries                    -- Set HW Transmit Retry Limit
 set swtxretries                    -- Set SW Transmit Retry Limit
 set rtsthreshold                   -- Set RTS/CTS Threshold
 set shortpreamble                  -- Set Short Preamble
 set shortslottime                  -- Set Short Slot Time
 set sntpserver                     -- Set SNTP/NTP Server IP Address
 set softwareretry                  -- Set Software Retry
 set spurImmunityLvl                -- Set ANI Parameter for Spur Immunity Level
 set ssid                           -- Set Service Set ID
 set ssidsuppress                   -- Set SSID Suppress Mode
 set SuperG                         -- Super G Features 
 set systemname                     -- Set Access Point System Name
 set telnet                         -- Set Telnet Mode
 set timeout                        -- Set Telnet Timeout
 set tzone                          -- Set Time Zone Setting
 set updateparam                    -- Set Vendor Default Firmware Update Params
 set vlan                           -- Set VLAN Mode
 set watchdog                       -- Set Watchdog Mode
 set wds                            -- Set WDS Mode
 set webUI                          -- Set Web UI Mode
 set wep                            -- Set Encryption Mode
 set wlanstate                      -- Set wlan state
 set wirelessmode                   -- Set Wireless LAN Mode
 set wmm                            -- Set WMM Mode
 set wmmParamBss                    -- Set WMM parameters used by STAs in this BSS
 set wmmParam                       -- Set WMM parameters used by this AP
 spy report                         -- Print spy report
 spy show                           -- Print debug info
 spy start                          -- Start spy
 spy stop                           -- Stop spy
 start wlan                         -- Start the current wlan
 stop wlan                          -- Stop the current wlan
 support                            -- Print support information
 timeofday                          -- Display Current Time of Day
 v54 alg                            -- Set/show the antenna algorithm
 v54 ant                            -- Video54 Antenna Config
 v54 antreset                       -- Reset V54 TxCtrl State
 v54 rtt                            -- Real-time Telemetry output
 v54 fchan                          -- Fast Channel Change
 v54 emon                           -- Environmental Monitoring
 v54 learn                          -- Send V54 learning packets
 v54 queue                          -- Video54 Queuing Debug Info
 v54 reset                          -- Reset V54 TxCtrl State
 v54 staQueue                       -- Per-Station-Queue scheduling
 v54 staticant                      -- Configure a static antenna
 v54 staticant                      -- Configure a static antenna
 version                            -- Software version
 video classifier                   -- Classify
 video qos                          -- Quality Of Service
 video pcap                         -- Packet capture
wlan0 -> Invalid input characters!
wlan0 -> wlan0 -> wlan0 -> wlan0 -> wlan0 -> boot 
Invalid input characters!
wlan0 -> boot 
Invalid input characters!
wlan0 -> boot flash
BOOT PARAM           : bootline
IP Addrress          : 192.168.0.1:ffffff00
Host                 : 
Gateway              : 
Startup script       : 
other                : AP
boot device          : tffs:
unit number          : 1 
processor number     : 0 
file name            : /fl/apv54
inet on ethernet (e) : 192.168.0.1:ffffff00
flags (f)            : 0x80 
other (o)            : AP
wlan0 -> boot 
Invalid input characters!
wlan0 -> boor
Invalid input characters!
wlan0 -> bootrom
Not enough parameters!
wlan0 -> bootrom
Not enough parameters!
wlan0 -> help bootrom
List of Access Point CLI commands:
 ?                                  -- Display CLI Command List
 arp add                            -- create or modify ARP table entry
 arp delete                         -- remove ARP table entry
 arp flush                          -- flush all entries in the ARP table
 arp show                           -- Display firmware information
 board change                       -- Change Board Data
 board dump                         -- Dump Board Data
 add remoteWbr                      -- Add a remote Wireless Bridge
 admin                              -- Temporary factory admin
 boot flash                         -- Boot from flash
 boot ethernet                      -- Boot from network
 boot dump                          -- dump boot line data
 cat                                -- list file
 cp                                 -- Copy file
 config wlan                        -- config wlanX
 connect bss                        -- connect to bssX
 del acl                            -- Delete Access Control List
 del key                            -- Delete Encryption key
 del remoteWbr                      -- Delete a remote Wireless Bridge
 del seed                           -- Delete Random Seed
 dis                                -- Dis-associate an End Station
 eeprom                             -- dump eeprom data
 find bss                           -- Find BSS
 find channel                       -- Find Available Channel
 find all                           -- Find All BSS
 format                             -- Format flash filesytem
 bootrom                            -- Update boot rom image
 ftp                                -- Software update via FTP
 get 11gonly                        -- Display 11g Only Allowed
 get 11goptimize                    -- Display 11g Optimization Level
 get 11goverlapbss                  -- Display Overlapping BSS Protection
 get abolt                          -- 
 get acl                            -- Display Access Control List
 get aging     ^C                     -- Display Aging Interval
 get antenna                        -- Display Antenna Diversity
 get arp                            -- Display arp Table
 get if                             -- Display attached network interfaces
 get routes     
                    -- Display routing table 
 get association                    -- Display Association Table
 get authentication          
       -- Display Authentication Type
 get autoProvision                  -- Display Auto-Provision 
Mode
 get autochannelselect              -- Display Auto Channel Select
 get basic11b                       -- Display Basic 11b Rates
 get 
basic11g                       -- Display Basic 11g Rates
 get beaconinterval                 -- Display Beacon Interval
 get bridgeTable                    -- Display internal SW bridge table
 get burstSeqThreshold              -- Display Max Number of frames in a Burst
 get burstTime                      -- Display Burst Time
 get cacheperf                      -- Display the cache performance counters
 get calibration                    -- Display Noise And Offset Calibration Mode
 get cckTrigHigh                    -- Display Higher Trigger Threshold for CCK Phy Errors for ANI Control
 get cckTrigLow                     -- Display Lower Trigger Threshold for CCK Phy Errors for ANI Control
 get cckWeakSigThr                  -- Display ANI Parameter for CCK Weak Signal Detection Threshold
 get channel                        -- Display Radio Channel
 get cipher                         -- Display Encryption cipher
 get compproc                       -- Display Compression scheme
 get compwinsize                    -- Display Compression Window Size
 get config                         -- Display Current AP Configuration
 get countrycode                    -- Display Country Code
 get ctsmode                        -- Display CTS mode
 get ctsrate                        -- Display CTS rate
 get ctstype                        -- Display CTS type
 get domainsuffix                   -- Display Domain Name Server suffix
 get dtim                           -- Display Data Beacon Rate (DTIM)
 get dhcp                           -- Display DHCP Client Mode
 get enableANI                      -- Display Adaptive Noise Immunity Control On/Off
 get encryption                     -- Display Encryption Mode
 get eth                            -- Display Ethernet Statistics
 get extendedchanmode               -- Display Extended Channel Mode
 get firStepLvl                     -- Display ANI Parameter for FirStepLevel
 get fragmentthreshold              -- Display Fragment Threshold
 get frequency                      -- Display Radio Frequency (MHz)
 get gateway                        -- Display Gateway IP Address
 get gbeaconrate                    -- Display 11g Beacon Rate
 get gdraft5                        -- Display 11g Draft 5.0 compatibility
 get groupkeyupdate                 -- Display Group Key Update Interval (in Seconds)
 get hardware                       -- Display Hardware Revisions
 get hostipaddr                     -- Display Host IP Address
 get ipaddr                         -- Display IP Address
 get ipmask                         -- Display IP Subnet Mask
 get jsw                            -- Display Jumpstart Mode
 get jsP2PassPhrase                 -- Display JS-P2 passphrase
 get key                            -- Display Encryption Key
 get keyentrymethod                 -- Display Encyrption Key Entry Method
 get keysource                      -- Display Source Of Encryption Keys
 get ledStatus                      -- Display current LED status
 get login                          -- Display Login User Name
 get minimumrate                    -- Display Minimum Rate
 get nameaddr                       -- Display IP address of name server
 get nf                             -- Display Noise Floor
 get noiseImmunityLvl               -- Display ANI Parameter for Noise Immunity Level
 get ofdmTrigHigh                   -- Display Higher Trigger Threshold for OFDM Phy Errors for ANI Control
 get ofdmTrigLow                    -- Display Lower Trigger Threshold for OFDM Phy Errors for ANI Control
 get ofdmWeakSigDet                 -- Display ANI Parameter for OFDM Weak Signal Detection
 get overRidetxpower                -- Display Tx power override
 get operationMode                  -- Display Operation Mode
 get passphrase                     -- Display Passphrase
 get passphrasekey                  -- Display Passphrase Key
 get perfstats                      -- Dump system performance stats
 get pnetmon                        -- NetTask profile information
 get pktLogEnable                   -- Display Packet Logging Mode
 get power                          -- Display Transmit Power Setting
 get quietAckCtsAllow               -- Display if Ack/Cts frames are allowed during quiet period
 get quietDuration                  -- Display Duration of quiet period
 get quietOffset                    -- Display Offset of quiet period into the beacon period
 get radiusname                     -- Display RADIUS server name or IP address
 get radiusport                     -- Display RADIUS port number
 get rate                           -- Display Data Rate
 get reg                            -- Display the register contents at the given offset
 get remoteAp                       -- Display Remote Ap's Mac Address
 get reset                          -- Display # of resets
 get remoteWbr                      -- Display configured Remote Wireless bridges
 get hwtxretries                    -- Display HW Transmit Retry Limit
 get swtxretries                    -- Display SW Transmit Retry Limit
 get rtsthreshold                   -- Display RTS/CTS Threshold
 get seed                           -- Display Random Seed
 get shortpreamble                  -- Display Short Preamble Usage
 get shortslottime                  -- Display Short Slot Time Usage
 get sib                            -- Display Station Information
 get sntpserver                     -- Display SNTP/NTP Server IP Address
 get softwareretry                  -- Display Software Retry
 get spurImmunityLvl                -- Display ANI Parameter for Spur Immunity Level
 get ssid                           -- Display Service Set ID
 get ssidsuppress                   -- Display SSID Suppress Mode
 get station                        -- Display Station Status
 get SuperG                         -- Display SuperG Feature Status
 get systemname                     -- Display Access Point System Name
 get telnet                         -- Display Telnet Mode
 get timeout                        -- Display Telnet Timeout
 get times                          -- Display startup times
 get tzone                          -- Display Time Zone Setting
 get updateparam                    -- Display Vendor Default Firmware Update Params
 get uptime                         -- Display UpTime
 get vlan                           -- Display VLAN Mode
 get watchdog                       -- Display Watchdog Mode
 get wds                            -- Display WDS Mode
 get webUI                          -- Display WebUI Mode
 get wep                            -- Display Encryption Mode
 get wirelessmode                   -- Display Wireless LAN Mode
 get wmm                            -- Display WMM Mode
 get wmmParamBss ac                 -- Get EDCA values for this access class
 get wmmParam ac                    -- Get EDCA values for this access class
 get wmmParam queue                 -- Get EDCA values for this HW queue
 get wlanstate                      -- Display wlan state
 help                               -- Display CLI Command List
 Lebradeb                           -- Disable reboot during radar detection
 ls                                 -- list directory
 logoff                             -- Logoff
 mem                                -- system memory statistics
 mv                                 -- Move file
 np                                 -- Network Performance
 ns                                 -- Network Performance Server
 ping                               -- Ping
 pktLog                             -- Packet Log
 radar!                             -- Simulate radar detection on current channel
 reboot                             -- Reboot Access Point
 rm                                 -- Remove file
 run                                -- Run command file
 task priority                      -- Set task priority
 task show                          -- Set task info
 task stack                         -- Set task stack info
 task resume                        -- resume task
 task suspend                       -- suspend task
 tftp                               -- Software update via TFTP
 quit                               -- Logoff
 set 11gonly disable                -- Disable 11g only allowed
 set 11gonly enable                 -- Enable 11g only allowed
 set 11goptimize                    -- Set 11g Optimization Level
 set 11goverlapbss disable          -- Disable Overlapping BSS protection
 set 11goverlapbss enable           -- Enable Overlapping BSS protection
 set abolt                          -- 
 set acl allow                      -- Add MAC address to the ACL
 set acl enable                     -- Select Restricted Access
 set acl deny                       -- Add MAC address to the disabled ACL
 set acl disable                    -- Select Unrestrict Access
 set acl keymap                     -- Add Encryption key mapping for MAC address
 set acl strict                     -- Select Restricted (w/ACL match) Access
 set aging                          -- Set Aging Interval
 set antenna best                   -- Enable antenna diversity
 set antenna 1                      -- Select antenna 1
 set antenna 2                      -- Select antenna 2
 set authentication open-system     -- Select Open-System Authentication Type
 set authentication shared-key      -- Select Shared-Key Authentication Type
 set authentication auto            -- Select auto Authentication Type
 set authentication WPA             -- Select Authentication WPA Type
 set authentication WPA-PSK         -- Select Authentication WPA-PSK Type
 set authentication WPA2            -- Select WPA2 for Authentication Type
 set authentication WPA2-PSK        -- Select WPA2-PSK for Authentication Type
 set authentication WPA-AUTO        -- Allow WPAv1 or WPAv2 for Authentication Type
 set authentication WPA-AUTO-PSK    -- Allow WPAv1-PSK or WPAv2-PSK for Authentication Type
 set autoProvision disable          -- Disable Auto-Provisioning by AP
 set autoProvision enable           -- Enable Auto-Provisioning by AP
 set autochannelselect disable      -- Disable Automatic Channel Selection
 set autochannelselect enable       -- Enable Automatic Channel Selection
 set basic11b disable               -- Disable only basic 11b rates - use all rates
 set basic11b enable                -- Enable only basic 11b rates (1, 2)
 set basic11g 11                    -- Basic Rates (1, 2)
 set basic11g 11b                   -- Basic Rates (1, 2, 5.5, 11)
 set basic11g 11g                   -- Basic Rates (1, 2, 5.5, 11, 6, 12, 24)
 set basic11g ofdm                  -- Basic Rates (6, 12, 24)
 set beaconinterval                 -- Modify Beacon Interval
 set burstSeqThreshold              -- Set Max Number of frames in a Burst
 set burstTime                      -- Set Burst Time
 set cachePerf ic                   -- i-cache performance counters
 set cachePerf dc                   -- d-cache performance counters
 set cachePerf cm                   -- i and d-cache miss  counters
 set cachePerf ch                   -- i and d-cache hit   counters
 set calibration                    -- Set Calibration Period
 set cckTrigHigh                    -- Set Higher Trigger Threshold for CCK Phy Errors For ANI Control
 set cckTrigLow                     -- Set Lower Trigger Threshold for CCK Phy Errors For ANI Control
 set cckWeakSigThr                  -- Set ANI Parameter for CCK Weak Signal Detection Threshold
 set channel                        -- Set Radio Channel
 set cipher wep                     -- Select wep
 set cipher aes                     -- Select aes
 set cipher tkip                    -- Select tkip
 set cipher auto                    -- Select cipher through negotiation
 set compproc                       -- Set Compression Scheme
 set compwinsize                    -- Set Compression Window Size
 set countrycode                    -- Set Country Code
 set ctsmode                        -- Set CTS Mode
 set ctsrate                        -- Set CTS Rate
 set ctstype                        -- Set CTS Type
 set domainsuffix                   -- Set Domain Name Server Suffix
 set dtim                           -- Set Data Beacon Rate (DTIM)
 set dhcp disable                   -- Disable DHCP
 set dhcp enable                    -- Enable DHCP
 set enableANI                      -- Turn Adaptive Noise Immunity Control On/Off
 set encryption disable             -- Disable Encryption
 set encryption enable              -- Enable Encryption
 set extendedchanmode disable       -- Disable Extended Channel Mode
 set extendedchanmode enable        -- Enable Extended Channel Mode
 set factorydefault                 -- Restore to Default Factory Settings
 set firStepLvl                     -- Set ANI Parameter for FirStepLevel
 set fragmentthreshold              -- Set Fragment Threshold
 set frequency                      -- Set Radio Frequency (MHz)
 set gateway                        -- Set Gateway IP Address
 set gbeaconrate                    -- Set 11g Beacon Rate
 set groupkeyupdate                 -- Set Group Key Update Interval (in Seconds)
 set gdraft5 disable                -- Disable 11g Draft 5.0 compatibility
 set gdraft5 enable                 -- Enable 11g Draft 5.0 compatibility
 set hostipaddr                     -- Set Host IP address
 set ipaddr                         -- Set IP Address
 set ipmask                         -- Set IP Subnet Mask
 set jsw enable                     -- Enable  Jumpstart
 set jsw disable                    -- Disable  Jumpstart
 set jsp2Passwd                     -- Set JS-P2 password
 set key default                    -- Set Default Encryption Key
 set key 40                         -- Set 40-bit Encryption Key
 set key 104                        -- Set 104-bit Encryption Key
 set key 128                        -- Set 128-bit Encryption Key
 set keyentrymethod hexadecimal     -- Key contains (0 - 9, A - F)
 set keyentrymethod asciitext       -- Key contains keyboard characters
 set keysource flash                -- All keys will be read from flash (no key derivation)
 set keysource server               -- All keys will be derived from authentication server
 set keysource mixed                -- Keys read from flash or derived from authentication server
 set login                          -- Modify Login User Name
 set minimumrate 0.25               -- Select 0.25 Mbps
 set minimumrate 0.5                -- Select 0.5 Mbps
 set minimumrate 1                  -- Select 1 Mbps
 set minimumrate 2                  -- Select 2 Mbps
 set minimumrate 3                  -- Select 3 Mbps
 set minimumrate 6                  -- Select 6 Mbps
 set minimumrate 9                  -- Select 9 Mbps
 set minimumrate 12                 -- Select 12 Mbps
 set minimumrate 18                 -- Select 18 Mbps
 set minimumrate 24                 -- Select 24 Mbps
 set minimumrate 36                 -- Select 36 Mbps
 set minimumrate 48                 -- Select 48 Mbps
 set minimumrate 54                 -- Select 54 Mbps
 set minimumrate 12                 -- Select 12 Mbps
 set minimumrate 18                 -- Select 18 Mbps
 set minimumrate 24                 -- Select 24 Mbps
 set minimumrate 36                 -- Select 36 Mbps
 set minimumrate 48                 -- Select 48 Mbps
 set minimumrate 72                 -- Select 72 Mbps
 set minimumrate 96                 -- Select 96 Mbps
 set minimumrate 108                -- Select 108 Mbps
 set minimumrate 1                  -- Select 1 Mbps
 set minimumrate 2                  -- Select 2 Mbps
 set minimumrate 5.5                -- Select 5.5 Mbps
 set minimumrate 11                 -- Select 11 Mbps
 set minimumrate 0.25               -- Select 0.25 Mbps
 set minimumrate 0.5                -- Select 0.5 Mbps
 set minimumrate 1                  -- Select 1 Mbps
 set minimumrate 2                  -- Select 2 Mbps
 set minimumrate 1x                 -- Select XR 1 Mbps
 set minimumrate 2x                 -- Select XR 2 Mbps
 set minimumrate 3                  -- Select 3 Mbps
 set minimumrate 5.5                -- Select 5.5 Mbps
 set minimumrate 11                 -- Select 11 Mbps
 set minimumrate 6                  -- Select 6 Mbps
 set minimumrate 9                  -- Select 9 Mbps
 set minimumrate 12                 -- Select 12 Mbps
 set minimumrate 18                 -- Select 18 Mbps
 set minimumrate 24                 -- Select 24 Mbps
 set minimumrate 36                 -- Select 36 Mbps
 set minimumrate 48                 -- Select 48 Mbps
 set minimumrate 54                 -- Select 54 Mbps
 set minimumrate 12                 -- Select 12 Mbps
 set minimumrate 18                 -- Select 18 Mbps
 set minimumrate 24                 -- Select 24 Mbps
 set minimumrate 36                 -- Select 36 Mbps
 set minimumrate 48                 -- Select 48 Mbps
 set minimumrate 72                 -- Select 72 Mbps
 set minimumrate 96                 -- Select 96 Mbps
 set minimumrate 108                -- Select 108 Mbps
 set nameaddress                    -- Set Name Server IP address
 set noiseImmunityLvl               -- Set ANI Parameter for Noise Immunity Level
 set ofdmTrigHigh                   -- Set Higher Trigger Threshold for OFDM Phy Errors for ANI Control
 set ofdmTrigLow                    -- Set Lower Trigger Threshold for OFDM Phy Errors for ANI Control
 set ofdmWeakSigDet                 -- Set ANI Parameter for OFDM Weak Signal Detection
 set overRidetxpower                -- Set Tx power override
 set operationMode ap               -- Operating as Access Point
 set operationMode sta              -- Operating as Wireless Client
 set operationMode wbr              -- Operating as Wireless Bridge
 set operationMode repeater         -- Operating as Wireless Repeater
 set password                       -- Modify Password
 set passphrase                     -- Modify Passphrase
 set pktLogEnable                   -- Enable Packet Logging
 set power full                     -- Set maximum (normal) transmit power
 set power half                     -- Set fractional (1/2) transmit power
 set power quarter                  -- Set fractional (1/4) transmit power
 set power eighth                   -- Set fractional (1/8) transmit power
 set power min                      -- Set minimum transmit power
 set quietAckCtsAllow               -- Allow Ack/Cts frames during quiet period
 set quietDuration                  -- Duration of quiet period
 set quietOffset                    -- Offset of quiet period into the beacon period
 set radiusname                     -- Set RADIUS name or IP address
 set radiusport                     -- Set RADIUS port number
 set radiussecret                   -- Set RADIUS shared secret
 set rate best                      -- Select best data rate
 set rate 6                         -- Select 6 Mbps
 set rate 9                         -- Select 9 Mbps
 set rate 12                        -- Select 12 Mbps
 set rate 18                        -- Select 18 Mbps
 set rate 24                        -- Select 24 Mbps
 set rate 36                        -- Select 36 Mbps
 set rate 48                        -- Select 48 Mbps
 set rate 54                        -- Select 54 Mbps
 set rate best                      -- Select best data rate
 set rate 12                        -- Select 12 Mbps
 set rate 18                        -- Select 18 Mbps
 set rate 24                        -- Select 24 Mbps
 set rate 36                        -- Select 36 Mbps
 set rate 48                        -- Select 48 Mbps
 set rate 72                        -- Select 72 Mbps
 set rate 96                        -- Select 96 Mbps
 set rate 108                       -- Select 108 Mbps
 set rate best                      -- Select best data rate
 set rate 1                         -- Select 1 Mbps
 set rate 2                         -- Select 2 Mbps
 set rate 5.5                       -- Select 5.5 Mbps
 set rate 11                        -- Select 11 Mbps
 set rate best                      -- Select best data rate
 set rate 1                         -- Select 1 Mbps
 set rate 2                         -- Select 2 Mbps
 set rate 5.5                       -- Select 5.5 Mbps
 set rate 11                        -- Select 11 Mbps
 set rate 6                         -- Select 6 Mbps
 set rate 9                         -- Select 9 Mbps
 set rate 12                        -- Select 12 Mbps
 set rate 18                        -- Select 18 Mbps
 set rate 24                        -- Select 24 Mbps
 set rate 36                        -- Select 36 Mbps
 set rate 48                        -- Select 48 Mbps
 set rate 54                        -- Select 54 Mbps
 set rate best                      -- Select best data rate
 set rate 12                        -- Select 12 Mbps
 set rate 18                        -- Select 18 Mbps
 set rate 24                        -- Select 24 Mbps
 set rate 36                        -- Select 36 Mbps
 set rate 48                        -- Select 48 Mbps
 set rate 72                        -- Select 72 Mbps
 set rate 96                        -- Select 96 Mbps
 set rate 108                       -- Select 108 Mbps
 set reg                            -- Set Register Value
 set regulatorydomain               -- Set Regulatory Domain
 set remoteAP                       -- Set Remote AP's Mac Address
 set hwtxretries                    -- Set HW Transmit Retry Limit
 set swtxretries                    -- Set SW Transmit Retry Limit
 set rtsthreshold                   -- Set RTS/CTS Threshold
 set shortpreamble disable          -- Disable Short Preamble (use only long)
 set shortpreamble enable           -- Enable Short and Long Preamble
 set shortslottime disable          -- Disable Short Slot Time (use only long)
 set shortslottime enable           -- Enable Short Slot Time
 set sntpserver                     -- Set SNTP/NTP Server IP Address
 set softwareretry enable           -- Enable Software Retry
 set softwareretry disable          -- Disable Software Retry
 set spurImmunityLvl                -- Set ANI Parameter for Spur Immunity Level
 set ssid                           -- Set Service Set ID
 set ssidsuppress enable            -- Enable SSID suppress mode
 set ssidsuppress disable           -- Disable SSID suppress mode
 set SuperG enable                  -- Enable SuperG Features
 set SuperG disable                 -- Disable SuperG Features
 set systemname                     -- Set Access Point System Name
 set telnet disable                 -- Disable Telnet access
 set telnet enable                  -- Enable Telnet access
 set timeout                        -- Set Telnet Timeout
 set tzone                          -- Set Time Zone Setting
 set updateparam                    -- Set Vendor Default Firmware Update Params
 set vlan disable                   -- Disable VLAN
 set vlan enable                    -- Enable VLAN
 set watchdog disable               -- Disable Watchdog
 set watchdog enable                -- Enable Watchdog
 set wds disable                    -- Disable WDS support
 set wds enable                     -- Enable WDS support
 set webUI disable                  -- Disable Web UI
 set webUI enable                   -- Enable Web UI
 set wep disable                    -- Disable Encryption
 set wep enable                     -- Enable Encryption
 set wlanstate disable              -- Disable wlan
 set wlanstate enable               -- Enable wlan
 set wirelessmode 11a               -- 802.11a
 set wirelessmode 11b               -- 802.11b
 set wirelessmode 11g               -- 802.11g
 set wirelessmode 108g static       -- 802.11g Static Turbo
 set wirelessmode 108g dynamic      -- 802.11g Dynamic Turbo
 set wirelessmode turbo static      -- 802.11a Static Turbo
 set wirelessmode turbo dynamic     -- 802.11a Dynamic Turbo
 set wmm disable                    -- Disable WMM
 set wmm enable                     -- Enable WMM
 set wmmParamBss ac                 -- Set EDCA values for all access classes
 set wmmParam ac                    -- Set EDCA values for all access classes
 set wmmParam queue                 -- Set EDCA values for all HW queues
 spy report                         -- Print spy report
 spy show                           -- Print debug info
 spy start                          -- Start spy
 spy stop                           -- Stop spy
 start wlan                         -- Start the current wlan
 stop wlan                          -- Stop the current wlan
 support                            -- Print support information
 timeofday                          -- Display Current Time of Day
 v54 alg                            -- Set/show the antenna algorithm
 v54 ant                            -- Video54 Antenna Config
 v54 antreset                       -- Reset V54 TxCtrl State
 v54 rtt                            -- Real-time Telemetry output
 v54 fchan                          -- Fast Channel Change
 v54 emon rx disable                -- Disable Rx stats gathering
 v54 emon rx enable                 -- Enable  Rx stats gathering
 v54 emon tx disable                -- Disable Tx stats gathering
 v54 emon tx enable                 -- Enable  Tx stats gathering
 v54 emon output disable            -- Disable emon periodic output
 v54 emon output enable             -- Enable  emon periodic output
 v54 emon dump second               -- Dump per-second stats history
 v54 emon dump minute               -- Dump per-minute stats history
 v54 emon dump hour                 -- Dump per-hour   stats history
 v54 learn                          -- Send V54 learning packets
 v54 queue                          -- Video54 Queuing Debug Info
 v54 reset                          -- Reset V54 TxCtrl State
 v54 staQueue clear                 -- Reset PSQ statistics counters
 v54 staQueue disable               -- Disable Per-Station-Queue scheduling
 v54 staQueue enable                -- Enable Per-Station-Queue scheduling
 v54 staQueue hires disable         -- Disable using Hi-Res Clock
 v54 staQueue hires enable          -- Enable using Hi-Res Clock
 v54 staQueue priorityAdjust        -- PSQ priority-adjust factor
 v54 staQueue queueLimit            -- PSQ per-station max queue size
 v54 staQueue show                  -- Display PSQ statistics
 v54 staticant                      -- Configure a static antenna
 v54 staticant                      -- Configure a static antenna
 version                            -- Software version
 video classifier actions tos disable -- Disable TOS marking
 video classifier actions tos enable -- Enable TOS marking
 video classifier actions tos video -- Set Video TOS value
 video classifier actions tos voIP  -- Set VoIP TOS value
 video classifier both dbmcast disable -- Disable Directed Bcast/Mcast Feature
 video classifier both dbmcast enable -- Enable Directed Bcast/Mcast Feature
 video classifier both disable      -- Disable Classification on Interface
 video classifier both enable       -- Enable Classification on Interface
 video classifier both igmp disable -- Disable IGMP Snooping
 video classifier both igmp enable  -- Enable IGMP Snooping
 video classifier both port add tcp dest tos video -- Mark TOS with video value
 video classifier both port add tcp dest tos voice -- Mark TOS with voice value
 video classifier both port add tcp dest drop -- Drop packet
 video classifier both port add tcp dest pcap -- Capture packet
 video classifier both port add tcp dst tos video -- Mark TOS with video value
 video classifier both port add tcp dst tos voice -- Mark TOS with voice value
 video classifier both port add tcp dst drop -- Drop packet
 video classifier both port add tcp dst pcap -- Capture packet
 video classifier both port add tcp src tos video -- Mark TOS with video value
 video classifier both port add tcp src tos voice -- Mark TOS with voice value
 video classifier both port add tcp src drop -- Drop packet
 video classifier both port add tcp src pcap -- Capture packet
 video classifier both port add udp dest tos video -- Mark TOS with video value
 video classifier both port add udp dest tos voice -- Mark TOS with voice value
 video classifier both port add udp dest drop -- Drop packet
 video classifier both port add udp dest pcap -- Capture packet
 video classifier both port add udp dst tos video -- Mark TOS with video value
 video classifier both port add udp dst tos voice -- Mark TOS with voice value
 video classifier both port add udp dst drop -- Drop packet
 video classifier both port add udp dst pcap -- Capture packet
 video classifier both port add udp src tos video -- Mark TOS with video value
 video classifier both port add udp src tos voice -- Mark TOS with voice value
 video classifier both port add udp src drop -- Drop packet
 video classifier both port add udp src pcap -- Capture packet
 video classifier both port delete tcp dest tos video -- Mark TOS with video value
 video classifier both port delete tcp dest tos voice -- Mark TOS with voice value
 video classifier both port delete tcp dest drop -- Drop packet
 video classifier both port delete tcp dest pcap -- Capture packet
 video classifier both port delete tcp dst tos video -- Mark TOS with video value
 video classifier both port delete tcp dst tos voice -- Mark TOS with voice value
 video classifier both port delete tcp dst drop -- Drop packet
 video classifier both port delete tcp dst pcap -- Capture packet
 video classifier both port delete tcp src tos video -- Mark TOS with video value
 video classifier both port delete tcp src tos voice -- Mark TOS with voice value
 video classifier both port delete tcp src drop -- Drop packet
 video classifier both port delete tcp src pcap -- Capture packet
 video classifier both port delete udp dest tos video -- Mark TOS with video value
 video classifier both port delete udp dest tos voice -- Mark TOS with voice value
 video classifier both port delete udp dest drop -- Drop packet
 video classifier both port delete udp dest pcap -- Capture packet
 video classifier both port delete udp dst tos video -- Mark TOS with video value
 video classifier both port delete udp dst tos voice -- Mark TOS with voice value
 video classifier both port delete udp dst drop -- Drop packet
 video classifier both port delete udp dst pcap -- Capture packet
 video classifier both port delete udp src tos video -- Mark TOS with video value
 video classifier both port delete udp src tos voice -- Mark TOS with voice value
 video classifier both port delete udp src drop -- Drop packet
 video classifier both port delete udp src pcap -- Capture packet
 video classifier both port disable -- Disable port classification Mode
 video classifier both port enable  -- Enable port classification Mode
 video classifier both port show    -- Show current L4 port filters
 video classifier both show         -- Show Classification Info
 video classifier both nonzero disable -- Disable Non-zero TOS marking
 video classifier both nonzero enable -- Enable Non-zero TOS marking
 video classifier both unkMcast disable -- Disable Unknown Mcast Drop
 video classifier both unkMcast enable -- Enable Unknown Mcast Drop
 video classifier both upnp disable -- Disable UPnP Processing
 video classifier both upnp enable  -- Enable UPnP Processing
 video classifier ethernet dbmcast disable -- Disable Directed Bcast/Mcast Feature
 video classifier ethernet dbmcast enable -- Enable Directed Bcast/Mcast Feature
 video classifier ethernet disable  -- Disable Classification on Interface
 video classifier ethernet enable   -- Enable Classification on Interface
 video classifier ethernet igmp disable -- Disable IGMP Snooping
 video classifier ethernet igmp enable -- Enable IGMP Snooping
 video classifier ethernet port add tcp dest tos video -- Mark TOS with video value
 video classifier ethernet port add tcp dest tos voice -- Mark TOS with voice value
 video classifier ethernet port add tcp dest drop -- Drop packet
 video classifier ethernet port add tcp dest pcap -- Capture packet
 video classifier ethernet port add tcp dst tos video -- Mark TOS with video value
 video classifier ethernet port add tcp dst tos voice -- Mark TOS with voice value
 video classifier ethernet port add tcp dst drop -- Drop packet
 video classifier ethernet port add tcp dst pcap -- Capture packet
 video classifier ethernet port add tcp src tos video -- Mark TOS with video value
 video classifier ethernet port add tcp src tos voice -- Mark TOS with voice value
 video classifier ethernet port add tcp src drop -- Drop packet
 video classifier ethernet port add tcp src pcap -- Capture packet
 video classifier ethernet port add udp dest tos video -- Mark TOS with video value
 video classifier ethernet port add udp dest tos voice -- Mark TOS with voice value
 video classifier ethernet port add udp dest drop -- Drop packet
 video classifier ethernet port add udp dest pcap -- Capture packet
 video classifier ethernet port add udp dst tos video -- Mark TOS with video value
 video classifier ethernet port add udp dst tos voice -- Mark TOS with voice value
 video classifier ethernet port add udp dst drop -- Drop packet
 video classifier ethernet port add udp dst pcap -- Capture packet
 video classifier ethernet port add udp src tos video -- Mark TOS with video value
 video classifier ethernet port add udp src tos voice -- Mark TOS with voice value
 video classifier ethernet port add udp src drop -- Drop packet
 video classifier ethernet port add udp src pcap -- Capture packet
 video classifier ethernet port delete tcp dest tos video -- Mark TOS with video value
 video classifier ethernet port delete tcp dest tos voice -- Mark TOS with voice value
 video classifier ethernet port delete tcp dest drop -- Drop packet
 video classifier ethernet port delete tcp dest pcap -- Capture packet
 video classifier ethernet port delete tcp dst tos video -- Mark TOS with video value
 video classifier ethernet port delete tcp dst tos voice -- Mark TOS with voice value
 video classifier ethernet port delete tcp dst drop -- Drop packet
 video classifier ethernet port delete tcp dst pcap -- Capture packet
 video classifier ethernet port delete tcp src tos video -- Mark TOS with video value
 video classifier ethernet port delete tcp src tos voice -- Mark TOS with voice value
 video classifier ethernet port delete tcp src drop -- Drop packet
 video classifier ethernet port delete tcp src pcap -- Capture packet
 video classifier ethernet port delete udp dest tos video -- Mark TOS with video value
 video classifier ethernet port delete udp dest tos voice -- Mark TOS with voice value
 video classifier ethernet port delete udp dest drop -- Drop packet
 video classifier ethernet port delete udp dest pcap -- Capture packet
 video classifier ethernet port delete udp dst tos video -- Mark TOS with video value
 video classifier ethernet port delete udp dst tos voice -- Mark TOS with voice value
 video classifier ethernet port delete udp dst drop -- Drop packet
 video classifier ethernet port delete udp dst pcap -- Capture packet
 video classifier ethernet port delete udp src tos video -- Mark TOS with video value
 video classifier ethernet port delete udp src tos voice -- Mark TOS with voice value
 video classifier ethernet port delete udp src drop -- Drop packet
 video classifier ethernet port delete udp src pcap -- Capture packet
 video classifier ethernet port disable -- Disable port classification Mode
 video classifier ethernet port enable -- Enable port classification Mode
 video classifier ethernet port show -- Show current L4 port filters
 video classifier ethernet show     -- Show Classification Info
 video classifier ethernet nonzero disable -- Disable Non-zero TOS marking
 video classifier ethernet nonzero enable -- Enable Non-zero TOS marking
 video classifier ethernet unkMcast disable -- Disable Unknown Mcast Drop
 video classifier ethernet unkMcast enable -- Enable Unknown Mcast Drop
 video classifier ethernet upnp disable -- Disable UPnP Processing
 video classifier ethernet upnp enable -- Enable UPnP Processing
 video classifier wireless dbmcast disable -- Disable Directed Bcast/Mcast Feature
 video classifier wireless dbmcast enable -- Enable Directed Bcast/Mcast Feature
 video classifier wireless disable  -- Disable Classification on Interface
 video classifier wireless enable   -- Enable Classification on Interface
 video classifier wireless igmp disable -- Disable IGMP Snooping
 video classifier wireless igmp enable -- Enable IGMP Snooping
 video classifier wireless port add tcp dest tos video -- Mark TOS with video value
 video classifier wireless port add tcp dest tos voice -- Mark TOS with voice value
 video classifier wireless port add tcp dest drop -- Drop packet
 video classifier wireless port add tcp dest pcap -- Capture packet
 video classifier wireless port add tcp dst tos video -- Mark TOS with video value
 video classifier wireless port add tcp dst tos voice -- Mark TOS with voice value
 video classifier wireless port add tcp dst drop -- Drop packet
 video classifier wireless port add tcp dst pcap -- Capture packet
 video classifier wireless port add tcp src tos video -- Mark TOS with video value
 video classifier wireless port add tcp src tos voice -- Mark TOS with voice value
 video classifier wireless port add tcp src drop -- Drop packet
 video classifier wireless port add tcp src pcap -- Capture packet
 video classifier wireless port add udp dest tos video -- Mark TOS with video value
 video classifier wireless port add udp dest tos voice -- Mark TOS with voice value
 video classifier wireless port add udp dest drop -- Drop packet
 video classifier wireless port add udp dest pcap -- Capture packet
 video classifier wireless port add udp dst tos video -- Mark TOS with video value
 video classifier wireless port add udp dst tos voice -- Mark TOS with voice value
 video classifier wireless port add udp dst drop -- Drop packet
 video classifier wireless port add udp dst pcap -- Capture packet
 video classifier wireless port add udp src tos video -- Mark TOS with video value
 video classifier wireless port add udp src tos voice -- Mark TOS with voice value
 video classifier wireless port add udp src drop -- Drop packet
 video classifier wireless port add udp src pcap -- Capture packet
 video classifier wireless port delete tcp dest tos video -- Mark TOS with video value
 video classifier wireless port delete tcp dest tos voice -- Mark TOS with voice value
 video classifier wireless port delete tcp dest drop -- Drop packet
 video classifier wireless port delete tcp dest pcap -- Capture packet
 video classifier wireless port delete tcp dst tos video -- Mark TOS with video value
 video classifier wireless port delete tcp dst tos voice -- Mark TOS with voice value
 video classifier wireless port delete tcp dst drop -- Drop packet
 video classifier wireless port delete tcp dst pcap -- Capture packet
 video classifier wireless port delete tcp src tos video -- Mark TOS with video value
 video classifier wireless port delete tcp src tos voice -- Mark TOS with voice value
 video classifier wireless port delete tcp src drop -- Drop packet
 video classifier wireless port delete tcp src pcap -- Capture packet
 video classifier wireless port delete udp dest tos video -- Mark TOS with video value
 video classifier wireless port delete udp dest tos voice -- Mark TOS with voice value
 video classifier wireless port delete udp dest drop -- Drop packet
 video classifier wireless port delete udp dest pcap -- Capture packet
 video classifier wireless port delete udp dst tos video -- Mark TOS with video value
 video classifier wireless port delete udp dst tos voice -- Mark TOS with voice value
 video classifier wireless port delete udp dst drop -- Drop packet
 video classifier wireless port delete udp dst pcap -- Capture packet
 video classifier wireless port delete udp src tos video -- Mark TOS with video value
 video classifier wireless port delete udp src tos voice -- Mark TOS with voice value
 video classifier wireless port delete udp src drop -- Drop packet
 video classifier wireless port delete udp src pcap -- Capture packet
 video classifier wireless port disable -- Disable port classification Mode
 video classifier wireless port enable -- Enable port classification Mode
 video classifier wireless port show -- Show current L4 port filters
 video classifier wireless show     -- Show Classification Info
 video classifier wireless nonzero disable -- Disable Non-zero TOS marking
 video classifier wireless nonzero enable -- Enable Non-zero TOS marking
 video classifier wireless unkMcast disable -- Disable Unknown Mcast Drop
 video classifier wireless unkMcast enable -- Enable Unknown Mcast Drop
 video classifier wireless upnp disable -- Disable UPnP Processing
 video classifier wireless upnp enable -- Enable UPnP Processing
 video qos disable                  -- Disable QOS Features
 video qos enable                   -- Enable QOS Features
 video qos mgtAcl disable           -- Disable MgtACL Feature
 video qos mgtAcl enable            -- Enable MgtACL Feature
 video qos show                     -- Display QOS state
 video qos txFail                   -- Set Tx Failure Threshold
 video pcap start                   -- Start capture
 video pcap continue                -- continue capture
 video pcap stop                    -- Stop capture
 video pcap save                    -- Save capture
 video pcap set                     -- Set options
 video pcap show                    -- Display capture status
wlan0 -> Invalid input characters!
wlan0 -> wlan0 -> wlan0 -> wlan0 -> wlan0 ->