Livebox Inventel

Serial port

screen -L /dev/ttyUSB0 115200 8N1

56+678ESA: 00:16:ae:93:86:28
WEP KEY : C48B121F07ED2224BAB6D3475C
Auto-negotiation timed-out
10 MB Half-Duplex (assumed)
Ethernet eth0: MAC address 00:16:ae:93:86:28
IP: 10.7.58.112, Default server: 0.0.0.0
Hardware version 0x10 BLUE5G.9 WITHOUT_OPTION
Factory Settings Recovery Switch OFF High
Register : 17
RedBoot(tm) bootstrap and debug environment [ROM]
Non-certified release, version release-wanadoo-fr - built 16:25:10, Jun 20 2006
Platform: Blue_5g (MIPS32 4Kc) 
Copyright (C) 2000, 2001, 2002, Red Hat, Inc.
RAM: 0x80000000-0x81000000, [0x80445fb0-0x80fe2000] available
FLASH: 0xbe400000 - 0xbec00000, 128 blocks of 0x00010000 bytes each.
== Executing boot script in 0.200 seconds - enter ^C twice to abort
RedBoot> fis load -b 0x80010000 -m cramfs -f Image user_fs
Partition is : 0xbe430000 - 0x390000 
mlen : 0x337034 
begin_tag : 0xbe767000, end : 0xbe767034
Verif OK 
Looking for Image in cramfs user_fs partition
cramfs_load : b 0x80010000, c 0xBE430000, s 0x00390000, f Image
unable to find magic
Found a valid SQUASHFS superblock on user_fs.
    Inodes are compressed
    Data is compressed
    Fragments are compressed
    Check data is not present in the filesystem
    Fragments are  present in the filesystem
    Always_use_fragments option is not specified
    Duplicates are  removed
    Filesystem size 3370576 bytes
    Block size 65536
    Number of fragments 28
    Number of inodes 658
    Number of uids 1
    Number of gids 0
Scanning existing filesystem...
Read existing filesystem, 657 inodes scanned
Return with root_try==0
RedBoot> exec -c "boot_loader=RedBoot root=1F01 mem=16M" 0x80010000
root_try == 0 : leave boot cmd alone
Now booting linux kernel:
 Base address 0x8000fc00 Entry 0x80010000
 Cmdline : boot_loader=RedBoot root=1F01 mem=16M hwversion=BLUE5G.9-WITHOUT_OPTION redbootversion="release-wanadoo-fr-Jun 20 2006-16:25:10"
Linux version 2.6.12.6 (bellonia@cplx207.edegem.eu.thmulti.com) (gcc version 3.4.2) #1 Fri Mar 14 19:07:34 CET 2008
C0 config : 2147516544x 
CPU revision is: 00029107
mpi: No Card is in the PCMCIA slot
Determined physical RAM map:
 memory: 00fa0000 @ 00000000 (usable)
 memory: 00060000 @ 00fa0000 (reserved)
On node 0 totalpages: 4000
  DMA zone: 4000 pages, LIFO batch:1
  Normal zone: 0 pages, LIFO batch:1
  HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: boot_loader=RedBoot root=1F01 hwversion=BLUE5G.9-WITHOUT_OPTION redbootversion="release-wanadoo-fr-Jun 20 2006-16:25:10"
brcm mips: enabling icache and dcache...
Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 8kB, 2-way, linesize 16 bytes.
Synthesized TLB refill handler (19 instructions).
Synthesized TLB load handler fastpath (31 instructions).
Synthesized TLB store handler fastpath (31 instructions).
Synthesized TLB modify handler fastpath (30 instructions).
PID hash table entries: 64 (order: 6, 1024 bytes)
Using 128.000 MHz high precision timer.
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 13148k/16000k available (1831k kernel code, 2832k reserved, 236k data, 336k init, 0k highmem)
Calibrating delay loop... (HZ=200) 255.59 BogoMIPS (lpj=638976)
Mount-cache hash table entries: 512
Checking for 'wait' instruction...  unavailable.
NET: Registered protocol family 16
Squashfs 2.2 (released 2005/07/03) (C) 2002-2005 Phillip Lougher
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
io scheduler noop registered
lo:register_netdevice:2847
PPP generic driver version 2.4.2
NET: Registered protocol family 24
initialize redboot parser
Found: AMD AM29LV640MB
Inventel Blue5G Flash: Found 1 x16 devices at 0x0 in 16-bit bank
number of JEDEC chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
parse_redboot_partitions
Searching for RedBoot partition table in Inventel Blue5G Flash at offset 0x7f0000
6 RedBoot partitions found on MTD device Inventel Blue5G Flash
Creating 6 MTD partitions on "Inventel Blue5G Flash":
0x00000000-0x00030000 : "RedBoot"
0x00030000-0x003c0000 : "user_fs"
0x003c0000-0x00750000 : "user_2_fs"
0x00750000-0x007f0000 : "jffs_system"
0x007f0000-0x007ff000 : "FIS directory"
0x007ff000-0x00800000 : "RedBoot config"
bcm963xx_serial driver v2.0
u32 classifier
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
ip_conntrack version 2.1 (125 buckets, 1000 max) - 212 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
NET: Registered protocol family 1
NET: Registered protocol family 17
Ebtables v2.0 registered
NET: Registered protocol family 8
NET: Registered protocol family 20
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 336k freed
init started:  BusyBox v1.1.3 (2008.03.14-18:14+0000) multi-call binary
init started:  BusyBox v1.1.3 (2008.03.14-18:14+0000) multi-call binary
Starting pid 15, console /dev/tts/0: '/etc_ro_fs/init.d/sysinit'
Algorithmics/MIPS FPU Emulator v1.5
SYSINIT
INVENTEL version : v5.10.7-mobistar-be
Mounting proc filesystem ...
Mounting tmpfs filesystem ...
> NORMAL BOOT <
+ [ -f /etc_ro_fs/autoconf.conf ]
+ . /etc_ro_fs/autoconf.conf
+ CONFIG_TARGET_NAME=Mobistar
+ CONFIG_GENERATION_5G=y
+ CONFIG_GATEWAY_RESIDENTIAL=y
+ CONFIG_BCM_VARIANT=6348
+ CONFIG_LINUX_2_6=y
+ CONFIG_LB2_NONE=y
+ CONFIG_RELEASE=y
+ CONFIG_STRIP_LIBS=y
+ CONFIG_DEFAULT_KERNEL_CONFIG_FILE=Config-LiveBox1-5G
+ CONFIG_DEFAULT_BUSYBOX_CONFIG_FILE=Config-Wanadoo-Release
+ CONFIG_ROOT_SQUASHFS=y
+ CONFIG_ROOT_SPLIT=y
+ CONFIG_RELEASE_BASE_DIR_HOME=y
+ CONFIG_GENERATE_PROGKIT=y
+ CONFIG_GENERATE_PROGKIT_PATH=redboot_6348_sdram_128mbit_flash_64mbit_20060620_rom_5G7G_release_wanadoo_fr
+ CONFIG_GENERATE_WEBUPDATE=y
+ CONFIG_GENERATE_WEBUPDATE_COMPLETEUPGRADECLONE=y
+ CONFIG_GENERATE_WEBUPDATE_PARTIALUPGRADECLONE=y
+ CONFIG_DEFAULT_UPDATE_DIRECTORY=inventel/blue_5g/mobistar/release-e
+ CONFIG_DEFAULT_UPDATE_DIRECTORY_FORCE=y
+ CONFIG_DEFAULT_UPDATE_MACHINE=developers.inventel.com
+ CONFIG_DEFAULT_UPDATE_USERNAME=inventel
+ CONFIG_DEFAULT_UPDATE_PASSWORD=inventel
+ CONFIG_UPDATE_ALERT=y
+ CONFIG_UPDATE_AUTOUPDATE_DELAY=10
+ CONFIG_UPDATE_AUTOUPDATE_ON_FIRST_PPP=y
+ CONFIG_AUTOUPDATE_NONE=y
+ CONFIG_VERSION_NAME_MAJOR=5.10
+ CONFIG_VERSION_NAME_MINOR_TYPE=.
+ CONFIG_VERSION_NAME_MINOR=7
+ CONFIG_VERSION_NAME_SUFFIX=-mobistar-be
+ CONFIG_VERSION_FQN=v5.10.7-mobistar-be
+ CONFIG_HW_VERSION=1.0
+ CONFIG_INCLUDE_PUBKEY=y
+ CONFIG_PUBKEY_FILENAME=release-wanadoo-fr
+ CONFIG_ADDRESS_192_168=y
+ CONFIG_ADDRESS_IP_0=192.168.1.1
+ CONFIG_ADDRESS_NETMASK_0=255.255.255.0
+ CONFIG_ADDRESS_BROADCAST_0=192.168.1.255
+ ADVANCE_MEMORY_CONFIGURATION=y
+ CONFIG_FLASH_64MBIT=y
+ CONFIG_SDRAM_128MBIT=y
+ CONFIG_PAIRABLE_TIMEOUT=600
+ CONFIG_STACK_BLUEZ=y
+ CONFIG_BLUEZ_RFCOMM=y
+ CONFIG_BLUEZ_SDPD=y
+ CONFIG_BLUEZ_PAN=y
+ CONFIG_BLUEZ_OBEX=y
+ CONFIG_BT_WATCHDOG=y
+ CONFIG_BLUETOOTH=y
+ CONFIG_BTNAME_HOSTNAME=y
+ CONFIG_BLUETOOTH_ALTERNATE=y
+ CONFIG_BLUETOOTH_ALTERNATE_VERSION=0x34313832
+ CONFIG_DECT_DISABLE_UPDATE=y
+ CONFIG_BLUEZ_TEST=y
+ CONFIG_DEVGATEWAY=y
+ CONFIG_INCLUDE_FRENCH_MOBISTAR=y
+ CONFIG_INCLUDE_ENGLISH_MOBISTAR=y
+ CONFIG_INCLUDE_DUTCH_MOBISTAR=y
+ CONFIG_DEFAULT_ENGLISH_MOBISTAR=y
+ CONFIG_ADSL=y
+ CONFIG_ADSL_RTC=y
+ CONFIG_ADSL_A2pBT009c1=y
+ CONFIG_ADSL_PPP_NAME=ppp_name
+ CONFIG_ADSL_PPP_PASS=ppp_pass
+ CONFIG_ADSLCTL=y
+ CONFIG_ADSL_MOD_AUTO=y
+ CONFIG_PPPOE_PASSTHRU=y
+ CONFIG_ADSL_BRIDAGE_MOBISTAR=y
+ CONFIG_ADSL_DEFAULT_BRIDAGE_PROFILE=0
+ CONFIG_ADSL_VP=8
+ CONFIG_ADSL_VC=35
+ CONFIG_ADSL_PROTOCOL=pppoe
+ CONFIG_ADSL_ENCAPS=LLCMUX
+ CONFIG_ADSL_MAX_CONNECT_TIME=0
+ CONFIG_BCM_USB=y
+ CONFIG_BCM_USB_PRODUCT_NAME=Inventel Gateway
+ CONFIG_WIRELESS_LAN=y
+ CONFIG_WIRELESS_LAN_WEPONLY_HANDLED_BY_NAS=y
+ CONFIG_WIFI_BLUETOOTH_COEXISTENCE=y
+ CONFIG_WIRELESS_BCMTOOLS=y
+ CONFIG_UPNP=y
+ CONFIG_EBTABLES=y
+ CONFIG_IPROUTE2=y
+ CONFIG_IPROUTE2_IP=y
+ CONFIG_IPROUTE2_TC=y
+ CONFIG_REMOTE_MGT=y
+ CONFIG_COUNTRY_BELGIUM=y
+ CONFIG_COUNTRY_FORCE=y
+ CONFIG_WIFI_SECURITY_WPA_ONLY=y
+ CONFIG_DEFINITIVE_PASSWORD=y
+ CONFIG_WANADOO_SERVER_KIT_DB=y
+ CONFIG_WANADOO_DB_UPDATE_DELAY=5
+ CONFIG_FT_SERVER_KIT_URL=http://suivilb.wanadoo.fr/servlets/maj
+ CONFIG_FT_SERVER_KIT_COUNTRY_CODE=1091
+ CONFIG_FT_UPDATE_SOLUTION=y
+ CONFIG_FEATURE_UPDATE_FT=y
+ CONFIG_SUPPORT_FIRMWARE_PUSH=y
+ CONFIG_GENERIC_SPI=y
+ CONFIG_WEB=y
+ CONFIG_WEB_LEFT_MENU_STYLE=y
+ CONFIG_WEB_LOGIN=admin
+ CONFIG_WEB_PASSWORD=admin
+ CONFIG_WEB_MOBISTAR=y
+ CONFIG_UPNP_MOBISTAR=y
+ CONFIG_VOIP=y
+ CONFIG_VOIP_RADVISION=y
+ CONFIG_VOIP_RADVISION_MOBISTAR=y
+ [ ! -f /etc_ro_fs/autoconf.conf ]
+ [ -z y ]
+ grep user.*_fs
+ cut -f1 -d:
+ cat /proc/mtd
+ mtdlist=mtd1
mtd2
+ [ -h /dev/root ]
+ ls -al /dev/root
+ sed s/.* -> mtdblock/mtd/
+ mtdroot=mtd1
+ echo mtd1 mtd2
+ sed s/mtd1//
+ mtdlist= mtd2
+ echo mtd2
+ sed s/mtd//
+ mtdlist=2
+ echo 2
+ echo Try to mount /dev/mtdblock2 on /usr
Try to mount /dev/mtdblock2 on /usr
+ flash_verify /dev/mtd2 0x29032005
Magic: 29032005
/dev/mtd2: opening...
/dev/mtd2: reading signature...
Signature (48 bytes):
    94 00 03 02 00 14 c8 e6 ba 36 82 81 2d 20 2d c2 
    80 84 13 ff 8e e8 ab 8d fe 20 00 14 ef f4 07 b9 
    fc a5 3f 00 5b 1e 0c 10 a7 8f 59 44 9d f3 d0 1d 
/dev/mtd2: hashing...
/dev/mtd2: importing public key...
/dev/mtd2: verifying hash...
/dev/mtd2: verification OK
+ mount -t squashfs /dev/mtdblock2 /usr
+ result=0
+ [ ! 0 -eq 0 ]
+ rm -f /var/run/rescue_boot
+ break
+ [ ! -e /etc/rc.d ]
+ rm -f /tmp/touch.test
+ find /lib/modules// -name prod_test*
+ insmod /lib/modules//2.6.12.6/extra/prod_test.ko
prod_test: module license 'Proprietary' taints kernel.
insmod: cannot insert `/lib/modules//2.6.12.6/extra/prod_test.ko': Success (1): Success
+ [ 1 = 0 ]
+ [ -n mtd0 ]
+ cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00030000 00010000 "RedBoot"
mtd1: 00390000 00010000 "user_fs"
mtd2: 00390000 00010000 "user_2_fs"
mtd3: 000a0000 00010000 "jffs_system"
mtd4: 0000f000 00010000 "FIS directory"
mtd5: 00001000 00010000 "RedBoot config"
+ cat /proc/mtd
+ grep jffs_system
+ sed -n s/\(mtd\)\(.*\):\(.\)*/\2/p
+ mount -t jffs2 -o rw /dev/mtdblock3 /mnt/jffs2/jffs2_3
+ rm -f /tmp/touch.test
+ touch /tmp/touch.test
+ [ ! -e /tmp/touch.test ]
+ rm -f /tmp/touch.test
+ [ -e /tmp/touch.test ]
+ [ ! -f /mnt/jffs2/jffs2_3/etc/issue ]
+ [ ! -f /mnt/jffs2/jffs2_3/etc/finished ]
+ cat+ grep version
 /etc/issue.bluedsl
+ x=INVENTEL version : v5.10.7-mobistar-be
+ cat /etc_ro_fs/issue.bluedsl
+ grep version
+ y=INVENTEL version : v5.10.7-mobistar-be
+ [ INVENTEL version : v5.10.7-mobistar-be = INVENTEL version : v5.10.7-mobistar-be ]
+ echo Up to date version INVENTEL version : v5.10.7-mobistar-be
Up to date version INVENTEL version : v5.10.7-mobistar-be
+ [ -f /usr/etc_ro_fs/init.d/usrboot ]
+ /usr/etc_ro_fs/init.d/usrboot
+ rm -f /var/run/rescue_boot
+ [ ! -f /usr/etc/finished ]
+ cat /usr/etc/issue.bluedsl
+ grep version
+ x=INVENTEL version : v5.10.7-mobistar-be
+ cat /usr/etc_ro_fs/issue.bluedsl
+ grep version
+ y=INVENTEL version : v5.10.7-mobistar-be
+ [ INVENTEL version : v5.10.7-mobistar-be = INVENTEL version : v5.10.7-mobistar-be ]
+ echo /usr up to date version INVENTEL version : v5.10.7-mobistar-be
/usr up to date version INVENTEL version : v5.10.7-mobistar-be
+ exit 0
+ exit 0
Starting pid 99, console /dev/tts/0: '/etc_ro_fs/init.d/rc.sysinit'
Mounting other filesystems ...
cp: /etc/crontab_root: No such file or directory
+ echo Switching to RUNLEVEL 1 ...
Switching to RUNLEVEL 1 ...
+ runlevel_manage 1
+ local previous
+ runlevel=1
+ [ -f /var/run/runlevel ]
+ previous=N
+ [ 1 = N ]
+ local scriptlist directorylist
+ directorylist=/etc/rc1.d/:/usr/etc/rc1.d/
+ OLDIFS=     
+ IFS=:     
+ scriptlist=
+ find /etc/rc1.d/ -name K*
+ sed s,/etc/rc1.d/,,
+ scriptlist= 
+ find /usr/etc/rc1.d/ -name K*
+ sed s,/usr/etc/rc1.d/,,
+ scriptlist=  
+ sort -u
+ scriptlist=
+ echo 1
+ echo 108
+ scriptlist=
+ sed s,/etc/rc1.d/,,
+ find /etc/rc1.d/ -name S*
+ scriptlist=S20network
S25update_ft
S10adsl
S26pair
S25wireless
S22backlight
S05hardware
S22http_server
S99printkoff
S25dhcp_dns_server 
+ find /usr/etc/rc1.d/ -name S*
+ sed s,/usr/etc/rc1.d/,,
+ scriptlist=S22upnp
S28krtp
S85voip
S27bluetooth
S90post_webupgrade S20network
S25update_ft
S10adsl
S26pair
S25wireless
S22backlight
S05hardware
S22http_server
S99printkoff
S25dhcp_dns_server 
+ echo S22upnp
+ echo S28krtp
+ echo S85voip
+ echo S27bluetooth
+ sort -u
+ echo S90post_webupgrade
+ echo S20network
+ echo S25update_ft
+ echo S10adsl
+ echo S26pair
+ echo S25wireless
+ echo S22backlight
+ echo S05hardware
+ echo S22http_server
+ echo S99printkoff
+ echo S25dhcp_dns_server
+ scriptlist=S05hardware
S10adsl
S20network
S22backlight
S22http_server
S22upnp
S25dhcp_dns_server
S25update_ft
S25wireless
S26pair
S27bluetooth
S28krtp
S85voip
S90post_webupgrade
S99printkoff
+ [ -f /etc/rc1.d/S05hardware ]
+ realscript=/etc/rc1.d/S05hardware
+ [ 1 != N ]
+ number=05hardware
+ echo 05hardware
+ cut -c 1-2
+ number=05
+ echo 05
+ suffix=hardware
+ stop=/etc/rc1.d/K[0-9][0-9]hardware
+ echo /etc/rc1.d/
+ sed s,rc1,rcN,
+ previous_start=/etc/rcN.d/S[0-9][0-9]hardware
+ [ -f /etc/rcN.d/S[0-9][0-9]hardware ]
+ sh /etc/rc1.d/S05hardware start
Starting core drivers...
Watchdog init Build:  Mar 14 2008  19:16:23
irq register OK
SPI driver Mar 14 2008 19:16:22
   usage: insmod spi.o [debug=1] [tty_low_latency=1]
Broadcom BCM6348B0 Ethernet Network Device v0.3 Mar 14 2008 19:05:21
Config Internal PHY Through MDIO
BCM63xx_ENET: Auto-negotiation timed-out
BCM63xx_ENET: 10 MB Half-Duplex (assumed)
eth0:register_netdevice:2847
eth0: MAC Address: 00:07:3A:FF:FF:FF
Broadcom BCM6348B0 Ethernet Network Device v0.3 Mar 14 2008 19:05:21
Config External PHY Through MDIO
BCM63xx_ENET: Auto-negotiation timed-out
BCM63xx_ENET: 10 MB Half-Duplex (assumed)
eth1:register_netdevice:2847
eth1: MAC Address: 00:07:3A:FF:FF:FF
USB MAC ADDRESS belongs to 00:16:AE:93:86:2D
USB HOST MAC ADDRESS belongs to 00:16:AE:93:86:2B
Broadcom BCM6348B0 USB Network Device v0.4 Mar 14 2008 19:05:23
usb0: MAC Address: 00 16 AE 93 86 2D
usb0: Host MAC Address: 00 16 AE 93 86 2B
usb0:register_netdevice:2847
Switch module creating proc entry
dummy0:register_netdevice:2847
dummy1:register_netdevice:2847
+ break
+ [ -f /etc/rc1.d/S10adsl ]
+ realscript=/etc/rc1.d/S10adsl
+ [ 1 != N ]
+ number=10adsl
+ echo 10adsl
+ cut -c 1-2
+ number=10
+ echo 10
+ suffix=adsl
+ stop=/etc/rc1.d/K[0-9][0-9]adsl
+ echo /etc/rc1.d/
+ sed s,rc1,rcN,
+ previous_start=/etc/rcN.d/S[0-9][0-9]adsl
+ [ -f /etc/rcN.d/S[0-9][0-9]adsl ]
+ sh /etc/rc1.d/S10adsl start
Loading ADSL & ATM kernel modules...
Starting ADSL daemon...
+ break
+ [ -f /etc/rc1.d/S20network ]
+ realscript=/etc/rc1.d/S20network
+ [ 1 != N ]
+ number=20network
+ echo 20network
+ cut -c 1-2
+ number=20
+ echo 20
+ suffix=network
+ stop=/etc/rc1.d/K[0-9][0-9]network
+ sed s,rc1,rcN,
+ echo /etc/rc1.d/
+ previous_start=/etc/rcN.d/S[0-9][0-9]network
+ [ -f /etc/rcN.d/S[0-9][0-9]network ]
+ sh /etc/rc1.d/S20network start
BcmAdsl_Initialize=0xC00DE0C8, g_pFnNotifyCallback=0xC00F3034
pSdramPHY=0xA0FFFFF8, 0x9FCF2278 0xDEADDEAD
AdslCoreHwReset: AdslOemDataAddr = 0xA0FFDE10
AdslCoreEcUpdTmr: timeMs=-275140 ecUpdMask=0x40000
Local network configuration ...
Ethernet network configuration ...
Hostname configuration : Mobistar-8628
br0:register_netdevice:2847
device dummy1 entered promiscuous mode
device usb0 entered promiscuous mode
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
br0: port 4(eth1) entering learning state
br0: port 3(eth0) entering learning state
br0: port 2(usb0) entering learning state
+ break
+ [ -f /etc/rc1.d/S22backlight ]
+ realscript=/etc/rc1.d/S22backlight
+ [ 1 != N ]
+ number=22backlight
+ echo 22backlight
+ cut -c 1-2
+ number=22
+ echo 22
+ suffix=backlight
+ stop=/etc/rc1.d/K[0-9][0-9]backlight
+ echo /etc/rc1.d/+ sed s,rc1,rcN,
+ previous_start=/etc/rcN.d/S[0-9][0-9]backlight
+ [ -f /etc/rcN.d/S[0-9][0-9]backlight ]
+ sh /etc/rc1.d/S22backlight start
Update Backlight state
Advanced
Device open failed: Address family not supported by protocol
+ break
+ [ -f /etc/rc1.d/S22http_server ]
+ realscript=/etc/rc1.d/S22http_server
+ [ 1 != N ]
+ number=22http_server
br0: topology change detected, propagating
br0: port 4(eth1) entering forwarding state
br0: topology change detected, propagating
br0: port 3(eth0) entering forwarding state
br0: topology change detected, propagating
br0: port 2(usb0) entering forwarding state
+ echo 22http_server
+ cut -c 1-2
+ number=22
+ echo 22
+ suffix=http_server
+ stop=/etc/rc1.d/K[0-9][0-9]http_server
+ echo /etc/rc1.d/
+ sed s,rc1,rcN,
+ previous_start=/etc/rcN.d/S[0-9][0-9]http_server
+ [ -f /etc/rcN.d/S[0-9][0-9]http_server ]
+ sh /etc/rc1.d/S22http_server start
Websrv start ...
+ break
+ [ -f /etc/rc1.d/S22upnp ]
+ [ -f /usr/etc/rc1.d/S22upnp ]
+ realscript=/usr/etc/rc1.d/S22upnp
+ [ 1 != N ]
+ number=22upnp
+ cut -c 1-2
+ echo 22upnp
+ number=22
+ echo 22
+ suffix=upnp
+ stop=/usr/etc/rc1.d/K[0-9][0-9]upnp
+ echo /usr/etc/rc1.d/
+ sed s,rc1,rcN,
+ previous_start=/usr/etc/rcN.d/S[0-9][0-9]upnp
+ [ -f /usr/etc/rcN.d/S[0-9][0-9]upnp ]
+ sh /usr/etc/rc1.d/S22upnp start
No ADSL, default: abc0
Upnp init ...
MyConfig in /usr/etc/upnp.conf:
    Debug=0
    descDocName: gatedesc.xml
    xmlPath: /usr/etc/linuxigd
    g_iptables: iptables
    g_forwardChainName: upnp
    g_preroutingChainName: upnp
    g_upstreamBitrate: 0
    g_downstreamBitrate: 0
 TGU: IpAddress: 192.168.1.1
+ break
+ [ -f /etc/rc1.d/S25dhcp_dns_server ]
+ realscript=/etc/rc1.d/S25dhcp_dns_server
+ [ 1 != N ]
+ number=25dhcp_dns_server
+ echo 25dhcp_dns_server
+ cut -c 1-2
+ number=25
+ echo 25
+ suffix=dhcp_dns_server
+ stop=/etc/rc1.d/K[0-9][0-9]dhcp_dns_server
+ echo /etc/rc1.d/
+ sed s,rc1,rcN,
 INFO : IGD root device successfully registered.
+ previous_start=/etc/rcN.d/S[0-9][0-9]dhcp_dns_server
+ [ -f /etc/rcN.d/S[0-9][0-9]dhcp_dns_server ]
+ sh /etc/rc1.d/S25dhcp_dns_server start
dnsmasq configured as dhcp server
dnsmasq start ( DNS / DHCP server ) ...
dnsmasq -o -r/etc/resolv.dnsmasq -z --dhcp-range=192.168.1.9,192.168.1.200,24h --dhcp-leasefile=/etc/dhcp.leases
[p2] iface->name: br0
[p2] iface->name: lo
+ break
+ [ -f /etc/rc1.d/S25update_ft ]
+ realscript=/etc/rc1.d/S25update_ft
+ [ 1 != N ]
+ number=25update_ft
+ echo 25update_ft
+ cut -c 1-2
+ number=25
+ echo 25
+ suffix=update_ft
+ stop=/etc/rc1.d/K[0-9][0-9]update_ft
+ echo /etc/rc1.d/
+ sed s,rc1,rcN,
+ previous_start=/etc/rcN.d/S[0-9][0-9]update_ft
+ [ -f /etc/rcN.d/S[0-9][0-9]update_ft ]
+ sh /etc/rc1.d/S25update_ft start
France Telecom Firmware Update Client v1.12
Copyright Inventel 2005-2006
+ break
+ [ -f /etc/rc1.d/S25wireless ]
+ realscript=/etc/rc1.d/S25wireless
+ [ 1 != N ]
+ number=25wireless
+ echo 25wireless
+ cut -c 1-2
+ number=25
+ echo 25
+ suffix=wireless
+ stop=/etc/rc1.d/K[0-9][0-9]wireless
+ echo /etc/rc1.d/
+ sed s,rc1,rcN,
+ previous_start=/etc/rcN.d/S[0-9][0-9]wireless
+ [ -f /etc/rcN.d/S[0-9][0-9]wireless ]
+ sh /etc/rc1.d/S25wireless start
 INFO : Advertisements Sent.  Listening for requests ... 
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
wl0:register_netdevice:2847
wl0: Broadcom BCM4318 802.11 Wireless Controller 3.131.35.0.cpe0.0
[p2] wl_event, bssid idx: 0
[p2] wl_event, dev: 00000000
[p2] dev == NULL, using wl->dev
[p2] wl_event, dev->name: wl0
[p2] wlc_sendup_event, bssid:0
device wl0 entered promiscuous mode
[p2] wl_event, bssid idx: 0
[p2] wl_event, dev: 00000000
[p2] dev == NULL, using wl->dev
[p2] wl_event, dev->name: wl0
[p2] wlc_sendup_event, bssid:0
br0: port 5(wl0) entering learning state
+ break
+ [ -f /etc/rc1.d/S26pair ]
+ realscript=/etc/rc1.d/S26pair
+ [ 1 != N ]
+ number=26pair
+ echo 26pair
+ cut -c 1-2
+ number=26
+ echo 26
+ suffix=pair
+ stop=/etc/rc1.d/K[0-9][0-9]pair
+ echo /etc/rc1.d/
+ sed s,rc1,rcN,
+ previous_start=/etc/rcN.d/S[0-9][0-9]pair
+ [ -f /etc/rcN.d/S[0-9][0-9]pair ]
+ sh /etc/rc1.d/S26pair start
Bad run level ...
Starting pairing manager
+ break
+ [ -f /etc/rc1.d/S27bluetooth ]
+ [ -f /usr/etc/rc1.d/S27bluetooth ]
+ realscript=/usr/etc/rc1.d/S27bluetooth
+ [ 1 != N ]
+ number=27bluetooth
+ echo 27bluetooth
br0: topology change detected, propagating
br0: port 5(wl0) entering forwarding state
+ cut -c 1-2
+ number=27
+ echo 27
+ suffix=bluetooth
+ stop=/usr/etc/rc1.d/K[0-9][0-9]bluetooth
+ echo /usr/etc/rc1.d/
+ sed s,rc1,rcN,
Update Backlight state
+ previous_start=/usr/etc/rcN.d/S[0-9][0-9]bluetooth
+ [ -f /usr/etc/rcN.d/S[0-9][0-9]bluetooth ]
+ sh /usr/etc/rc1.d/S27bluetooth start
Param: 
Advanced
Device open failed: Address family not supported by protocol
s_backlight : 1
Function cleanup_link_keys
R0=00:0B:6B:A0:DF:C1
wifi_nb : 1
0 link keys removed
/sbin/iwpriv wl0 del_mac ff:ff:ff:ff:ff:ff
R0=00:0B:6B:A0:DF:C1
/sbin/iwpriv wl0 add_mac 00:0B:6B:A0:DF:C1
/sbin/iwpriv wl0 maccmd 1
Bluetooth configuration ...
Bluetooth: Core ver 2.7
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.7
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM ver 1.5
Bluetooth: RFCOMM socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.2
Bluetooth: HCI UART driver ver 2.1
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
Bluetooth: SCO (Voice Link) ver 0.4
Bluetooth: SCO socket layer initialized
ttySPI, 391Khz
SPI: use CS0 on hardware that way have CS0 and CS2 linked, GPIOmode_grp1 configured to use PC-Card
ttySPI, 391Khz
ttySPI, 781Khz
ttySPI, 781Khz
ttySPI, 781Khz
Hardware version: 0x31303032 - Software version: 0x34313832
< HCI Command: ogf 0x3f, ocf 0x0002, plen 6
  2A 86 93 AE 16 00 
> HCI Event: 0x0e plen 4
  03 02 FC 00 
Configuring BT name
Connecting Daemons ...
Launching sdp and rfcomm services ...
Dial-Up Networking service registered
restart pairingd
pairingd : SIGTERM received
Configuring AFH
< HCI Command: ogf 0x03, ocf 0x003f, plen 10
  00 00 00 FE FF FF FF FF FF FF 
> HCI Event: 0x0e plen 4
  03 3F 0C 00 
Testing and configuring WIFI coexistence
[p2] wl_event, bssid idx: 0
[p2] wl_event, dev: 00000000
[p2] dev == NULL, using wl->dev
[p2] wl_event, dev->name: wl0
[p2] wlc_sendup_event, bssid:0
[p2] wl_event, bssid idx: 0
[p2] wl_event, dev: 00000000
[p2] dev == NULL, using wl->dev
[p2] wl_event, dev->name: wl0
[p2] wlc_sendup_event, bssid:0
< HCI Command: ogf 0x3f, ocf 0x0107, plen 5
  00 00 00 00 00 
> HCI Event: 0x0e plen 4
  03 07 FD 01 
coexistence not supported
[p2] wl_event, bssid idx: 0
[p2] wl_event, dev: 00000000
[p2] dev == NULL, using wl->dev
[p2] wl_event, dev->name: wl0
[p2] wlc_sendup_event, bssid:0
[p2] wl_event, bssid idx: 0
[p2] wl_event, dev: 00000000
[p2] dev == NULL, using wl->dev
[p2] wl_event, dev->name: wl0
[p2] wlc_sendup_event, bssid:0
< HCI Command: ogf 0x3f, ocf 0x0107, plen 5
  FF FF 00 00 00 
> HCI Event: 0x0e plen 4
  03 07 FD 01 
+ break
+ [ -f /etc/rc1.d/S28krtp ]
+ [ -f /usr/etc/rc1.d/S28krtp ]
+ realscript=/usr/etc/rc1.d/S28krtp
+ [ 1 != N ]
+ number=28krtp
+ echo 28krtp
+ cut -c 1-2
+ number=28
+ echo 28
+ suffix=krtp
+ stop=/usr/etc/rc1.d/K[0-9][0-9]krtp
+ echo /usr/etc/rc1.d/
+ sed s,rc1,rcN,
+ previous_start=/usr/etc/rcN.d/S[0-9][0-9]krtp
+ [ -f /usr/etc/rcN.d/S[0-9][0-9]krtp ]
+ sh /usr/etc/rc1.d/S28krtp start
krtp start ...
krtp ver 2.8 softdsp-vad-multiline-wb (Mar 14 2008 19:16:47)
Copyright (C) 2004 Inventel Systemes
Written 2004 by David Libault <david.libault@inventel.fr>
Written 2004 by Bruce Forgues <bruce.forgues@inventel.fr>
Written 2004 by Eric Humbert  <eric.humbert@inventel.fr>
+ break
+ [ -f /etc/rc1.d/S85voip ]
+ [ -f /usr/etc/rc1.d/S85voip ]
+ realscript=/usr/etc/rc1.d/S85voip
+ [ 1 != N ]
+ number=85voip
+ echo 85voip
+ cut -c 1-2
+ number=85
+ echo 85
+ suffix=voip
+ stop=/usr/etc/rc1.d/K[0-9][0-9]voip
+ echo /usr/etc/rc1.d/
+ sed s,rc1,rcN,
+ previous_start=/usr/etc/rcN.d/S[0-9][0-9]voip
+ [ -f /usr/etc/rcN.d/S[0-9][0-9]voip ]
+ sh /usr/etc/rc1.d/S85voip start
iptables: No chain/target/match by that name
iptables: No chain/target/match by that name
iptables: No chain/target/match by that name
voip start...
+ break
+ [ -f /etc/rc1.d/S90post_webupgrade ]
+ [ -f /usr/etc/rc1.d/S90post_webupgrade ]
+ realscript=/usr/etc/rc1.d/S90post_webupgrade
+ [ 1 != N ]
+ number=90post_webupgrade
+ echo 90post_webupgrade
+ cut -c 1-2
+ number=90
+ echo 90
+ suffix=post_webupgrade
+ stop=/usr/etc/rc1.d/K[0-9][0-9]post_webupgrade
+ echo /usr/etc/rc1.d/
+ sed s,rc1,rcN,
+ previous_start=/usr/etc/rcN.d/S[0-9][0-9]post_webupgrade
+ [ -f /usr/etc/rcN.d/S[0-9][0-9]post_webupgrade ]
+ sh /usr/etc/rc1.d/S90post_webupgrade start
[post_webupgrade] Detected 'start' from rc script during a normal boot. I will not start services now
+ break
+ [ -f /etc/rc1.d/S99printkoff ]
+ realscript=/etc/rc1.d/S99printkoff
+ [ 1 != N ]
+ number=99printkoff
+ echo 99printkoff
+ cut -c 1-2
+ number=99
+ echo 99
+ suffix=printkoff
+ stop=/etc/rc1.d/K[0-9][0-9]printkoff
+ echo /etc/rc1.d/
+ sed s,rc1,rcN,
+ previous_start=/etc/rcN.d/S[0-9][0-9]printkoff
+ [ -f /etc/rcN.d/S[0-9][0-9]printkoff ]
+ sh /etc/rc1.d/S99printkoff start
Setting printk off
+ break
+ rm -f /var/run/rc.pid
+ rm -f /var/run/runlevel_in_progress
+ rm -f /var/run/init_in_progress_stage
+ echo 1
Sysinit done
Please press Enter to activate this console. 
Starting pid 824, console /dev/tts/0: '/bin/login'
Mobistar-8628 login: root
Password: 
Login incorrect
Mobistar-8628 login: 
Login timed out after 60 seconds.
Please press Enter to activate this console. 
Starting pid 825, console /dev/tts/0: '/bin/login'
Mobistar-8628 login: root
Password: 
Login incorrect
Mobistar-8628 login: 
Login timed out after 60 seconds.
Please press Enter to activate this console. a
Starting pid 826, console /dev/tts/0: '/bin/login'
Mobistar-8628 login: admin
Password: 
Login incorrect
Mobistar-8628 login: root
Password: 
Login incorrect
Mobistar-8628 login: admin
Password: 
Login incorrect
Jan  1 00:05:35 login[826]: invalid password for `UNKNOWN' on `tts/0'
Please press Enter to activate this console.     
Starting pid 827, console /dev/tts/0: '/bin/login'
Mobistar-8628 login: root
Password: 
Login incorrect
Mobistar-8628 login: admin
Password: 
Login incorrect
Mobistar-8628 login: 
Login timed out after 60 seconds.
Please press Enter to activate this console. 
Starting pid 828, console /dev/tts/0: '/bin/login'
Mobistar-8628 login: