Good job, Helped me a lot.
Good job, Helped me a lot.
hola con el urtag tambien se puede levantar los equipos engenius eoc 2611p …saludos
y como lo haria ..como es el procedimiento…alguien que conosca …
i did have Runtime Code Version 60R109-6020G8 in my bbox2, it was working fine,
i flashed it with FAST3464_60A040.img.secure.bin
now, only On Led et On, even dsl /eth1 cables ares connecteed and i can't even access nighter to wbm nor telnet
i did reset: pushing rest button when switchin on, and i fixed the ip address to 192.168.1.15/255.255.255.0/192.168.1.1 but i do have nothing
help my pleaaaaase!
Anyone have this file : LV24 sources-toolchain-3.2.2.tar and the sources of the livebox 2 ?
Thanks in advance
works like a charm , no need for a jtag .
tought i lost my bbox2 ,
set up a lite debian , dhcp - and tftp server .
except bbox2 was asking for a different .img , so i changed the name , simple !
Here are some hi-res photos, and component datasheets, for the Cavnex JTAG programmer. The device reportedly supports the Lexra LX4000 and LX5000 series, (including, hopefully, the LX4189)
htt p: / / docs. google. com/folder/d/0B6wW18mYskvBNzg5MTFkMDEtOTQwZC00YWQ2LTgyMzAtNWFlYzU4ZGQwYTNj/edit
I do not have a Livebox2, so cannot test, and this is all the info I have. Thank you to Jason Hecker in Oz for generously supplying the programmer.
In order to run urjtag correctly look this:
jtag> initbus ejtag_dma
Initialized bus 1, active bus 0
After to type initbus ejtag_dma you have bus 1 active and you need change to the bus 1.
Type: bus 1
And now you can type readmem 0x……
Look this, near but no result:
If you want we can change information.
Once you get a root shell, you can dump the entire flash on the usb key like this:
dd if=/dev/mtdblock0 of=/mnt/sda1/wholeflash.dump
where /mnt/sda1 is the directory where your usb is mounted.
The team LVB2 has managed to make OpenWrt work on Fusiv 160 based routers[ (Agif, Livebox 2 and BBox 2), albeit without ethernet nor wifi for now.
Check it out: foro.seguridadwireless.net/livebox-2/
Could somebody please tell me what commands should i write in telnet to dump the entire flash of a bbox2 to a usb key en then to re-flash it onto another ? Thanks in advance.
One question please.
For jtag , do you use TRST, TDI, TDO, TMS, and TCK?
I think TRST is not needed.
To reduce the kernel size, you just have to do
mips-linux-uclibc-objcopy -O binary vmlinux vmlinuz
from the kernel build dir: 23,1 MB -> 2,9 MB
you should ask Agif, Jungo, or Sagem, not ikanos.
Asked Ikanos for the source of their modified Uboot:
Well finallly I got the wholeflash.bin(thanks kikko)
On livebox 2:
U-Boot 1.1.4 for FUSIV chipset by Ikanos(Jun 16 2009 - 15:49:51)
CPU: IKANOS Fusiv 160 Family
Ethernet Switch hardware reset
DRAM: 64 MB
Flash: 32 MB
Type "h" for HELP. Have fun!
Be carefull with this u-boot, is not easy to perform out the Agif.
In this site we are unlock the Livebox2, Orange Spain, cpu ikanos vx160.
But our U-boot is locked, we need an unlocked U-boot for install openwrt and other firmwares.
I think you have the U-boot of ninus guys, AGIF router, can you give us this U-boot?
Thanks in advance.
Hello. I am trying to debrick to APs with AR2313 and MX29LV800BTC.Do you have any updates on working with urjtag and atheros chips, any updates for urjtag.Thank you.
Nevermind. I finally managed myself to get cross-compiled transmission working.
I've read in your presentation that you've got transmission working on your bbox2. I own a (couple of) Livebox 2 with same hardware and I've been playing with different toolchains compiling some stuff with odd success. Some things work some do not. I compiled fuse and ntfs-3g to discover that the fuse module was needed (I'm with stupid). Then I compiled kernel sources from floss-livebox including that fuse module to just realize that it won't work nor even insmod -f. I tried transmission myself but all I get are "Segmentation fault" errors and other "niceties". Could you, please, make available that transmission you've managed to compile?
Thanks a lot.