Anichips Phoenix A20
Serial bootlog
It is booting Android by default on the serial console:
HELLO! BOOT0 is starting!
boot0 version : 2.0.0
read dram para.
dram driver version: 1.15
dram size =1024MB
0xeaeeefb3
super_standby_flag = 0
Succeed in opening nand flash.
block from 2 to 6
deal block 2
Succeed in reading Boot1 file head.
The size of Boot1 is 0x00068000.
The file stored in 0x00000000 of block 2 is perfect.
Check is correct.
Ready to disable icache.
Succeed in loading Boot1.
Jump to Boot1.
[ 0.148] boot1 version : 2.0.0
[ 0.157] script installed early ok
[ 0.157] pmu type = 3
[ 0.159] bat vol = 0 mv
[ 0.175] axi:ahb:apb=4:2:2
[ 0.175] set dcdc2=1400mv, clock=912M successed
[ 0.177] key
[ 0.189] no key found
[ 0.189] flash init start
[ 0.189] NB1 : enter NFB_Init
[ 0.192] NB1 : enter phy init
[ 0.195] [NAND] nand driver(b) version: 0x0x00000002, 0x0x00000012, data: 0x20130325
[ 0.205] get the good blk ratio from hwscan : 944
[ 0.208] NB1 : nand phy init ok
[ 2.026] _RepairLogBlkTbl start
[ 2.555] Log Block Index 0x00000000, LogicBlockNum: 0x00000090, LogBlockType: 0x00000001
[ 2.558] log0: 0x00000385, Log1: 0x00000384, WriteIndex: 0x00000001
[ 2.564] datablock: 0x000003a1, lastusedpage: 0x00000026
[ 2.572] [DUBG], check free block 0x000003f9 ok!
[ 3.101] Log Block Index 0x00000001, LogicBlockNum: 0x00000150, LogBlockType: 0x00000001
[ 3.104] log0: 0x0000039b, Log1: 0x000003f9, WriteIndex: 0x00000000
[ 3.111] datablock: 0x00000372, lastusedpage: 0x00000027
[ 3.118] [DUBG], check free block 0x000003f8 ok!
[ 3.654] Log Block Index 0x00000002, LogicBlockNum: 0x00000170, LogBlockType: 0x00000001
[ 3.657] log0: 0x0000039d, Log1: 0x000003f8, WriteIndex: 0x00000000
[ 3.663] datablock: 0x00000361, lastusedpage: 0x0000001f
[ 3.671] [DUBG], check free block 0x000003f5 ok!
[ 4.196] Log Block Index 0x00000003, LogicBlockNum: 0x000000f0, LogBlockType: 0x00000001
[ 4.199] log0: 0x000003b0, Log1: 0x000003f5, WriteIndex: 0x00000000
[ 4.206] datablock: 0x0000035e, lastusedpage: 0x0000002e
[ 4.211] _RepairLogBlkTbl end
[ 4.267] NB1 : init ok
[ 4.267] flash init finish
[ 4.292] fs init ok
[ 4.293] fattype FAT16
[ 4.293] fs mount ok
[ 4.298] nand good_block_ratio=944
[ 4.298] storage_type=0
[ 4.343] 0
[ 4.493] WRN:L232(Common/ui/display_interface/display_interface.c):fetch script data boot_disp.output_type fail
[ 4.498] WRN:L268(Common/ui/display_interface/display_interface.c):fetch script data boot_disp.output_mode fail
[ 4.508] WRN:L288(Common/ui/display_interface/display_interface.c):fetch script data boot_disp.auto_hpd fail
[ 4.518] lcd0_para.lcd_used=0
[ 4.521] 0
[ 4.724] 1
[ 4.925] 2
[ 5.126] 3
[ 5.327] 4
[ 5.528] 5
[ 5.729] tv detect, ret = 0
[ 5.729] no device plug
[ 5.729] key value = 0
[ 5.732] recovery key high 6, low 4
[ 5.833] show pic finish
[ 5.833] load kernel start
[ 5.863] load kernel successed
[ 5.863] start address = 0x4a000000
[ 6.665] jump to
U-Boot 2011.09-rc1 (Dec 26 2013 - 19:07:02) Allwinner Technology
CPU: SUNXI Family
Board: SUN7I-EVB
DRAM: 1 GiB
NAND: [NAND] set nand_good_block_ratio 944
3776 MiB
In: serial
Out: serial
Err: serial
--------fastboot partitions--------
-total partitions:11-
-name- -start- -size-
bootloader : 8000 8000
env : 10000 8000
boot : 18000 8000
system : 20000 100000
data : 120000 200000
misc : 320000 8000
recovery : 328000 10000
cache : 338000 a0000
private : 3d8000 8000
databk : 3e0000 80000
UDISK : 460000 300000
-----------------------------------
bootcmd set setargs_nand
Hit any key to stop autoboot: 1
Starting kernel ...
[ 0.767124] aw_pm_init: not support super standby.
[ 1.058063] ctp_fetch_sysconfig_para: ctp_unused.
[ 1.098485] [+++BLUESLEEP+++]bluesleep_probe: bluesleep_probe line 639
[ 1.098493]
[ 1.109482] [fantasy] err get cpu normal frequency from sysconfig failed
[ 2.264635] init: start e2fsck listening...
[ 2.647901] init: to sleep 1 seconds.
[ 3.652079] init: has waken up.
[ 3.655666] init: [william] hdmistatus = 0!
[ 3.660331] init: [william] tvstatus = 0!
[ 3.665324] init: width = 1280
[ 3.668731] init: height = 720
[ 3.672134] init: s.st_size = 3686400
[ 4.312024] init: do_umount: /data
[ 4.615805] init: do_umount: /cache
[ 4.723734] init: dont need format /dev/block/UDISK
[ 4.730607] init: dont need format /dev/block/private
[ 4.751768] init: do_umount: /databk
[ 4.920270] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
[ 5.269475] init: C_IN_START
[ 5.272525] init: path = /dev/block/data
[ 5.277420] init: C_IN_START
[ 5.281133] init: path = /dev/block/cache
[ 5.844099] android_usb: already disabled
[ 5.848970] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
[ 5.860817] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
[ 23.631301] init: sys_prop: permission denied uid:1003 name:service.bootanim.exit